Free Delivery on all orders over £99*
Save 28%

Omera 42W Constant Current Dimmable LED Panel Driver - 1-10V

£3199
RRP £4440
The RRP is the manufacturer's recommended retail price of the item.
120 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Omera is a 42W constant current LED driver designed for dimmable LED panel installations using 1-10V dimming control. It converts mains voltage to a regulated constant current output, eliminating flicker during dimming and maintaining stable light output across the dimming range. The driver measures 125mm x 83mm and is housed in a white plastic enclosure with ventilation ribs for passive heat dissipation.

Designed for both residential and commercial LED panel installations, the Omera integrates overheat and overload protection circuitry that cuts power if the driver exceeds safe operating temperature or if the connected load draws excessive current. The compact form factor allows installation inside ceiling voids behind recessed panels or within the mounting frames of surface-mounted panels, provided the void depth is at least 90mm to allow airflow around the casing.

The 1-10V dimming input accepts control signals from compatible dimmers and building management systems, allowing the driver to reduce output current in proportion to the control voltage. At 10V the driver outputs full current; at 1V it outputs minimum current (typically 10% of rated output). The IP20 rating restricts use to dry indoor locations only. The plastic housing and terminals are rated for operation up to 45°C ambient temperature.

Specification
Length (mm) 125
Projection (mm) 83
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What dimming protocol does this driver support?

The Omera uses 1-10V dimming control. It requires a compatible 1-10V dimmer or building management system to adjust output. It is not compatible with mains phase-cut dimmers designed for incandescent bulbs.

Can it be installed in bathroom ceilings?

No. The IP20 rating means the driver offers no protection against moisture ingress and must only be used in dry indoor locations. Bathrooms require IP44 or higher rated drivers depending on zone.

What LED panels is it compatible with?

The Omera is compatible with any LED panel rated for constant current drive and requiring up to 42W input power. Check the panel specification to confirm it accepts constant current rather than constant voltage input, and that its wattage does not exceed 42W.

Where should it be positioned during installation?

Install the driver in a ceiling void or panel mounting frame with at least 90mm clearance around the casing to allow passive heat dissipation through the ventilation ribs. Do not cover the driver or install it in contact with thermal insulation.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Omera is a 42W constant current LED driver designed for dimmable LED panel installations using 1-10V dimming control. It converts mains voltage to a regulated constant current output, eliminating flicker during dimming and maintaining stable light output across the dimming range. The driver measures 125mm x 83mm and is housed in a white plastic enclosure with ventilation ribs for passive heat dissipation.

    Designed for both residential and commercial LED panel installations, the Omera integrates overheat and overload protection circuitry that cuts power if the driver exceeds safe operating temperature or if the connected load draws excessive current. The compact form factor allows installation inside ceiling voids behind recessed panels or within the mounting frames of surface-mounted panels, provided the void depth is at least 90mm to allow airflow around the casing.

    The 1-10V dimming input accepts control signals from compatible dimmers and building management systems, allowing the driver to reduce output current in proportion to the control voltage. At 10V the driver outputs full current; at 1V it outputs minimum current (typically 10% of rated output). The IP20 rating restricts use to dry indoor locations only. The plastic housing and terminals are rated for operation up to 45°C ambient temperature.

    Specification
    Length (mm) 125
    Projection (mm) 83
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What dimming protocol does this driver support?

    The Omera uses 1-10V dimming control. It requires a compatible 1-10V dimmer or building management system to adjust output. It is not compatible with mains phase-cut dimmers designed for incandescent bulbs.

    Can it be installed in bathroom ceilings?

    No. The IP20 rating means the driver offers no protection against moisture ingress and must only be used in dry indoor locations. Bathrooms require IP44 or higher rated drivers depending on zone.

    What LED panels is it compatible with?

    The Omera is compatible with any LED panel rated for constant current drive and requiring up to 42W input power. Check the panel specification to confirm it accepts constant current rather than constant voltage input, and that its wattage does not exceed 42W.

    Where should it be positioned during installation?

    Install the driver in a ceiling void or panel mounting frame with at least 90mm clearance around the casing to allow passive heat dissipation through the ventilation ribs. Do not cover the driver or install it in contact with thermal insulation.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.