Description
The Noctis is a 2-light wall light built around two cylindrical brushed brass housings, each containing a GU10 bulb fitting (bulbs sold separately). The cylinders are independently adjustable on their vertical axis, allowing each beam to be directed up, down, or at an angle to create wash lighting across a wall, accent lighting onto artwork, or focused illumination onto a mirror or architectural feature.
Designed for hallways, living rooms, bathrooms (IP20 rated for zones outside splash areas) and bedrooms, the Noctis works well in symmetrical pairs flanking a mirror, artwork or doorway, or as a single fitting where directional accent lighting is needed. The 180mm projection from the wall sits the cylinders clear of most mirror frames and picture rails without dominating narrow hallways. The adjustable beam direction makes the fitting adaptable to different ceiling heights and furniture arrangements without re-positioning the back plate.
The brushed brass finish is applied to a metal body and shows a linear grain that softens reflections under direct light. The cylinders measure 80mm in length and approximately 50mm in diameter, giving the fitting enough presence to balance above a console table or either side of a bed headboard without overwhelming smaller wall sections. The Noctis is dimmable when paired with dimmable GU10 LED bulbs and a compatible dimmer switch, allowing control over both light intensity and the warmth of the brass tone under different lighting levels.
Specification
| Length (mm) |
80 |
| Projection (mm) |
180 |
| Dimmable |
Yes |
| Number Of Bulbs |
2 |
| Bulb Type |
GU10 |
| IP Rating |
IP20 |
| Warranty |
5 Years |
Frequently Asked
What bulbs does the Noctis take?
Each light housing takes a standard GU10 bulb (sold separately). Most users pair this fitting with warm-white LED GU10 bulbs between 4-6W and 2700K-3000K for general accent lighting, or with higher-wattage options for task lighting above mirrors.
Can the light direction be adjusted after installation?
Yes. Both cylindrical housings rotate independently on their vertical axis, allowing each beam to be directed up, down, or at an angle. This adjustment can be made after installation and changed as needed without tools.
Is the Noctis suitable for bathrooms?
The IP20 rating allows installation in bathrooms outside direct splash zones (zones 0, 1 and 2). It is suitable for positions above mirrors or on walls away from showers and baths, but not within 60cm of a water source.
Is it dimmable?
Yes, when fitted with dimmable GU10 LED bulbs and connected to a compatible LED dimmer switch. The dimmer must be rated for the total wattage of both bulbs combined.