Luxeon-1 Recessed Magnetic Track 2m - Black

The Luxeon-1 is a 2-metre recessed magnetic track in black aluminium, designed to carry magnetic lighting fixtures that can be repositioned along its length without tools. The track sits flush with the ceiling surface with a 56mm projection below the ceiling line, housing the magnetic rail inside an extruded aluminium channel. Fixtures attach magnetically and draw power through contact points, allowing them to be moved or removed as lighting needs change.

Designed for residential kitchens, retail display areas, galleries and commercial office spaces, the Luxeon-1 suits installations where lighting positions need to adapt over time. The 2-metre length covers larger rooms or extended runs without visible joins when multiple tracks are linked end-to-end. The black finish pairs with contemporary, industrial and minimalist interiors, and the flush-recessed installation removes the track hardware from view when looking horizontally across the ceiling.

The aluminium body acts as a heat sink, dissipating heat from attached fixtures to maintain safe operating temperatures and extend LED lifespan. The track carries an IP20 rating, suitable for dry indoor environments. Dimmer compatibility depends on the specific magnetic fixtures used rather than the track itself. Installation requires a ceiling void depth sufficient to accommodate the recessed housing, with electrical connection at one or both ends depending on run length and load.

What fixtures are compatible with this track?

The Luxeon-1 uses Ideal Lux's magnetic track system. Only magnetic spotlights and pendants designed for this system will attach and draw power. Standard track lighting fixtures are not compatible. Check the product specification for each fixture to confirm magnetic compatibility.

What ceiling void depth is needed for recessed installation?

The track requires a ceiling void deep enough to accommodate the recessed housing above the 56mm visible projection. Typical installation needs a minimum void depth of 80-100mm, though this varies depending on the specific mounting method and whether acoustic or fire-rated ceilings are involved. Consult a qualified electrician before cutting ceiling openings.

Can multiple tracks be joined end-to-end?

Yes. Multiple 2m sections can be linked to create longer continuous runs. Joiners are typically required to connect sections mechanically and electrically, and these are sold separately. Longer runs may need electrical feed at multiple points to manage voltage drop and load distribution.

Is the track dimmable?

The track itself supports dimming, but actual dimmer compatibility depends on the magnetic fixtures attached to it and the type of dimmer switch installed. LED fixtures on magnetic tracks typically require trailing-edge LED-compatible dimmers rather than older resistive dimmers.