Description
The Lucella is a 220mm square LED flush ceiling light with an integrated 20W 3000K LED behind a white opaque plastic diffuser. The fitting sits directly against the ceiling with a minimal 30mm projection, making it suitable for low-ceiling rooms, corridors, bathrooms (subject to zone restrictions) and commercial interiors where headroom is limited.
Designed as general lighting rather than decorative, the Lucella provides even, shadow-free illumination across kitchens, bathrooms, hallways, offices, retail spaces and hotel corridors. The 3000K colour temperature produces a neutral warm-white light that sits between cool office lighting and the warmer glow of residential table lamps. The square 220mm footprint covers a typical ceiling rose or junction box and the IP20 rating permits installation in dry indoor zones.
The white polycarbonate body and diffuser finish flush to the ceiling line once installed, giving a clean, unobtrusive appearance in white-ceilinged spaces. The non-dimmable LED is rated for 20,000+ hours at typical residential use, translating to approximately 10-15 years before replacement. The fitting weighs under 500g and can be installed onto standard plasterboard ceilings with appropriate fixings. Ideal Lux provides a five-year warranty covering manufacturing defects.
Specification
| Length (mm) |
220 |
| Projection (mm) |
220 |
| Dimmable |
No |
| Number Of Bulbs |
1 |
| Bulb Type |
LED |
| Colour Temperature |
3000K |
| IP Rating |
IP20 |
| Warranty |
5 Years |
Frequently Asked
Is the Lucella dimmable?
No. The integrated LED operates at full output only and is not compatible with dimmer switches. Connecting this fitting to a dimmer circuit may cause flickering or damage to the driver.
What ceiling height does this suit?
The 30mm projection makes the Lucella particularly suitable for low-ceiling rooms under 2.4m height, where pendant or semi-flush fittings would intrude into headroom. It works equally well in standard-height rooms where a minimal, flush-to-ceiling profile is preferred.
Can it be used in bathrooms?
The IP20 rating permits installation in bathroom zones outside the immediate shower or bath splash areas. For zones 1 or 2 (directly above a bath or shower), an IP44 or IP65-rated fitting is required. Check UK wiring regulations Part P for specific zone definitions.
How is it installed?
The Lucella mounts directly to a ceiling rose or junction box via a metal backplate. Standard UK mains wiring (live, neutral, earth) connects to a terminal block inside the fitting. The white cover clips or screws onto the backplate once wiring is complete. Professional installation by a qualified electrician is recommended.