Libra White Pillar Candle With Metallic Black Ombre Base - 10x20cm

The Libra 10x20cm pillar candle transitions from pure white at the crown to a metallic black ombre base, with the colour gradient blended through the paraffin wax itself rather than applied as a surface coating. The candle is manufactured in Europe from 100% paraffin wax, with a cotton wick rated for clean burning and minimal soot deposit over the 190-hour approximate burn time.

Designed as a table centrepiece or mantel accent, the 20cm height gives presence without overwhelming a typical dining table or console. The 10cm diameter provides stability on flat surfaces without needing a holder, though the candle can be placed on a plate or tray to catch drips during longer burns. The ombre effect creates a graduated tonal shift from light to dark, which becomes more pronounced as the candle burns down and exposes the darker wax beneath.

The metallic black base has a subtle shimmer under direct light, distinguishing it from a flat matte black. The paraffin formulation holds the wick centrally as the candle burns, reducing uneven melting that can tunnel traditional pillar candles. The 1.357kg weight gives the candle a solid presence and prevents it from toppling if knocked lightly during placement or when trimming the wick between burns.

How long does the candle burn?

The approximate burn time is 190 hours under normal indoor conditions. Actual burn time depends on ambient temperature, airflow and how long the candle is lit during each use. For best results, burn for 2-3 hours per session to allow the wax pool to reach the edges of the candle.

Does the ombre effect continue through the entire candle?

Yes. The colour gradient is blended through the paraffin wax during manufacture, so the transition from white to metallic black runs through the full depth of the candle, not just the surface.

Does it need a candle holder?

No. The 10cm diameter base provides stability on flat surfaces. However, placing the candle on a plate, tray or shallow dish is recommended to catch any wax drips that may occur during extended burns.

How is the wick maintained?

Trim the wick to 5-6mm before each lighting to reduce soot and ensure a clean flame. Allow the wax pool to solidify and cool completely before trimming to avoid damaging the wick base.