Kitesurf Loop LED Linear Pendant Light - White 1240mm

The Kitesurf Loop is a 1240mm linear pendant light combining two intersecting geometric elements: a frosted white hollow ring and a linear white bar, both lit by integrated 3000K LEDs producing 4000 lumens. The ring sits offset from the bar, creating a sculptural composition suspended on three fine cables from a rectangular white canopy. The 50W LED system is dimmable, requiring a compatible trailing-edge or leading-edge dimmer.

Designed for kitchen islands, dining tables and open-plan living spaces where both task and ambient light are needed, the Kitesurf Loop works best over surfaces 1000-1600mm long. The adjustable drop ranges from 450mm to 1500mm, allowing installation above worktops in lower-ceiling rooms or above dining tables in higher-ceiling spaces. The 120° beam angle distributes light evenly across the surface below while the frosted finish prevents glare when viewed from seated or standing positions.

The white powder-coated aluminium frame weighs 3kg once installed, giving the fitting enough presence to anchor a large island or table without dominating the sightline across an open room. The frosted white ring diffuses the LED strip inside it into a continuous glow rather than visible hotspots, while the linear bar provides the primary downward illumination. The matte white finish pairs with white or pale ceilings to minimise visual weight overhead.

Is the Kitesurf Loop dimmable?

Yes. The integrated 50W LED is dimmable but requires a compatible trailing-edge or leading-edge dimmer switch. Not all dimmer models work reliably with LED fittings, so check compatibility with your electrician before installation or contact us for dimmer recommendations.

What size table or island does it suit?

The 1240mm length works best over kitchen islands or dining tables between 1000mm and 1600mm long. For longer islands, two Kitesurf Loop fittings can be installed in series with 600-800mm spacing between their centres.

How is the drop adjusted?

The three suspension cables pass through the ceiling canopy and are adjustable during installation. The minimum drop of 450mm allows the fitting to sit 600-700mm above a worktop in rooms with 2.4m ceilings, while the maximum 1500mm drop suits higher-ceiling dining rooms where the light needs to hang lower over the table.

Does the ring and bar illuminate separately?

No. The integrated LED system illuminates both the frosted ring and the linear bar simultaneously. Both elements dim together when controlled by a compatible dimmer switch.