Fluxis LED Flush Ceiling Light - White, 30cm

The Fluxis is a 277mm diameter flush ceiling light with a white metal body and a satin polycarbonate diffuser that conceals an integrated LED light source. The fitting sits 30-40mm from the ceiling surface and casts warm 3000K light evenly across the room through the opaque polycarbonate, which diffuses the LED without visible hotspots or glare.

Designed for bedrooms, hallways, home offices and utility rooms with standard or lower ceiling heights, the Fluxis provides general ambient lighting rather than task or accent light. The flush-mount format works in rooms where a pendant would hang too low or where ceiling clearance above doors and furniture matters. The 277mm diameter suits rooms up to approximately 10-12 square metres depending on how much natural light the room receives during the day.

The white metal body is finished in a low-sheen paint that sits comfortably in modern, minimalist and Scandinavian interiors without adding visual weight to the ceiling plane. The satin polycarbonate diffuser is impact-resistant and lighter than glass, making the fitting easier to handle during installation. The integrated LED is rated for 3000K warm white output and is non-dimmable, so the fitting works on standard switched circuits without requiring dimmer compatibility.

Is the Fluxis dimmable?

No. The integrated LED is non-dimmable and operates on a standard switched circuit only. Pairing the fitting with a dimmer switch may cause flickering or damage to the LED driver.

Can this be used in a bathroom?

The IP20 rating means the Fluxis is not protected against moisture ingress, so it cannot be installed in bathroom zones where water spray or steam is present. It can be used in a hallway outside a bathroom or in a separate WC with adequate ventilation.

What size room does the 30cm version suit?

The 277mm diameter typically provides adequate ambient light for rooms up to 10-12 square metres, such as a small bedroom, home office, utility room or hallway. Larger rooms may benefit from multiple fittings or a larger diameter variant if available in the Fluxis range.

How is the fitting installed?

The Fluxis mounts directly to a standard UK ceiling rose or junction box using the baseplate screws. The polycarbonate diffuser clips or screws onto the metal body after wiring is complete. Installation should be carried out by a qualified electrician in accordance with current wiring regulations.