Description
The Fermi is a 20cm dome pendant light combining a nickel-finished metal shade with a clear glass lower panel and internal crystal accents that catch and refract light from the E27 bulb above. The polished nickel dome reflects light upward while the crystals suspended inside the clear glass base create sparkle and visual interest below the shade.
Designed for kitchen islands, breakfast bars, dining nooks and hallways, the Fermi works as a single pendant over a small table or in multiples spaced 60-80cm apart along a kitchen island. The adjustable drop ranges from 25cm to 96cm on installation, allowing the pendant to sit 70-75cm above a worktop or dining surface in rooms with ceiling heights of 2.4m and above. The compact 20cm diameter suits spaces where a larger pendant would overwhelm the proportions.
The nickel finish on the dome provides a cool metallic tone that pairs with stainless steel appliances, chrome fixtures and contemporary grey or white interiors. The clear glass base allows the crystal arrangement to remain visible from below while protecting the crystals from dust. The IP20 rating restricts the Fermi to dry indoor locations — it is not suitable for bathrooms or outdoor use.
The E27 bulb fitting accepts standard Edison screw LED, halogen or filament bulbs up to 60W (sold separately), giving control over light temperature and brightness. Most installations use a warm-white LED between 6-10W and 2700K-3000K to balance the cool nickel tone with warmer ambient light.
Specification
| Height |
17.5cm |
| Diameter |
20cm |
| Max Height |
96cm |
| Min Height |
25cm |
| Finish |
Nickel |
| Construction |
Metal |
| IP Rating |
IP20 |
| Voltage |
AC 220-240 |
| Bulb Base |
E27 |
| Wattage |
60 |
| Warranty |
2 Year Guarantee |
Downloads
Product Manual
Frequently Asked
What bulb does the Fermi take?
The pendant takes a standard E27 (Edison screw) bulb up to 60W. Bulbs are sold separately. Most users pair this with a warm-white LED between 6-10W and 2700K-3000K to balance the cool nickel finish with warmer ambient light.
Is the drop adjustable?
Yes. The cord is adjustable on installation from 25cm minimum to 96cm maximum total drop. For a kitchen island or dining table the pendant typically sits 70-75cm above the surface, which works in rooms with ceiling heights of 2.4m and above.
Can it be used in a bathroom?
No. The IP20 rating restricts the Fermi to dry indoor locations only. It is not suitable for bathrooms, wet rooms or outdoor use.
How is the crystal inside cleaned?
Switch off the power and allow the bulb to cool completely. The clear glass base unscrews from the nickel dome, allowing access to the internal crystal accents. Wipe gently with a dry microfibre cloth. Reassemble once dry and restore power.