Free Delivery on all orders over £99*
Save 29%

Eris 30W Constant Current Dimmable LED Driver - 1-10V

£8899
RRP £12600
The RRP is the manufacturer's recommended retail price of the item.
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Eris is a 30W constant current LED driver with 1-10V analogue dimming control, housed in a white plastic enclosure measuring 167mm long by 41mm deep. Constant current drivers regulate output current rather than voltage, making them suitable for LED fixtures where the forward voltage varies with temperature or load but a stable current is needed to maintain consistent brightness and lifespan.

Designed for residential, commercial and hospitality installations where dimmable LED lighting is specified, the driver fits into ceiling voids, false ceilings and service cavities behind lighting fixtures. The 167mm length and 41mm depth allow it to fit into standard ceiling depths of 100mm or greater without compression. The 1-10V dimming protocol is controlled by a separate 1-10V dimmer switch wired between the mains supply and the driver's control input terminals, giving flicker-free dimming down to approximately 10% output.

The IP20 rating limits use to dry indoor locations only — bathrooms, kitchens and outdoor applications require IP44 or higher. The white plastic housing includes cable entry knockouts at each end and screw-fix mounting holes for direct fixing to joists or false ceiling supports. Ideal Lux covers the driver with a 5-year warranty, reflecting the expected operating life when installed within rated parameters.

Specification
Length (mm) 167
Projection (mm) 41
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What is constant current and when is it needed?

Constant current drivers regulate output current (measured in milliamps) rather than voltage. They are required for LED fixtures where the LEDs are wired in series and the forward voltage varies with temperature. Most mid-to-high power LED downlights, panels and strips specify constant current drive.

What dimmer switch does it work with?

The Eris requires a separate 1-10V analogue dimmer switch. Standard mains dimmers (phase-cut, trailing-edge) are not compatible. 1-10V dimmers are widely available from lighting control manufacturers and send a low-voltage control signal to the driver's dimming input terminals.

Can it be used in bathrooms or kitchens?

The IP20 rating limits use to dry indoor locations only. For bathrooms (zones 1-3) and kitchens where steam or splashing may occur, an IP44 or IP65 rated driver is required. Check your fixture specification for the minimum IP rating needed.

What's the maximum LED fixture load?

The driver is rated at 30W output. The connected LED fixture(s) must not exceed 30W combined load. If the load is significantly lower (e.g. 10W) the driver may still operate but efficiency and dimming range can be reduced. Match the driver wattage as closely as possible to the fixture load for best performance.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Eris is a 30W constant current LED driver with 1-10V analogue dimming control, housed in a white plastic enclosure measuring 167mm long by 41mm deep. Constant current drivers regulate output current rather than voltage, making them suitable for LED fixtures where the forward voltage varies with temperature or load but a stable current is needed to maintain consistent brightness and lifespan.

    Designed for residential, commercial and hospitality installations where dimmable LED lighting is specified, the driver fits into ceiling voids, false ceilings and service cavities behind lighting fixtures. The 167mm length and 41mm depth allow it to fit into standard ceiling depths of 100mm or greater without compression. The 1-10V dimming protocol is controlled by a separate 1-10V dimmer switch wired between the mains supply and the driver's control input terminals, giving flicker-free dimming down to approximately 10% output.

    The IP20 rating limits use to dry indoor locations only — bathrooms, kitchens and outdoor applications require IP44 or higher. The white plastic housing includes cable entry knockouts at each end and screw-fix mounting holes for direct fixing to joists or false ceiling supports. Ideal Lux covers the driver with a 5-year warranty, reflecting the expected operating life when installed within rated parameters.

    Specification
    Length (mm) 167
    Projection (mm) 41
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What is constant current and when is it needed?

    Constant current drivers regulate output current (measured in milliamps) rather than voltage. They are required for LED fixtures where the LEDs are wired in series and the forward voltage varies with temperature. Most mid-to-high power LED downlights, panels and strips specify constant current drive.

    What dimmer switch does it work with?

    The Eris requires a separate 1-10V analogue dimmer switch. Standard mains dimmers (phase-cut, trailing-edge) are not compatible. 1-10V dimmers are widely available from lighting control manufacturers and send a low-voltage control signal to the driver's dimming input terminals.

    Can it be used in bathrooms or kitchens?

    The IP20 rating limits use to dry indoor locations only. For bathrooms (zones 1-3) and kitchens where steam or splashing may occur, an IP44 or IP65 rated driver is required. Check your fixture specification for the minimum IP rating needed.

    What's the maximum LED fixture load?

    The driver is rated at 30W output. The connected LED fixture(s) must not exceed 30W combined load. If the load is significantly lower (e.g. 10W) the driver may still operate but efficiency and dimming range can be reduced. Match the driver wattage as closely as possible to the fixture load for best performance.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.