Free Delivery on all orders over £99*
Save 30%

Eris 10W Constant Current LED Driver - 1-10V Dimmable

£4799
RRP £6840
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Eris is a 10W constant current LED driver with 1-10V analogue dimming protocol, housed in a 135mm white plastic casing rated IP20. It converts mains voltage to a stable DC current output, typically 350mA at 28-30V DC, allowing it to power single LED modules or strings of low-wattage LED chips that require constant current rather than constant voltage.

Designed for installation behind LED downlights, panel lights, strip lighting and architectural LED fixtures in residential and commercial interiors, the driver's compact 135mm x 30mm footprint fits into ceiling voids and back boxes with restricted depth. The 1-10V dimming protocol requires a separate 1-10V controller or compatible wall dimmer to adjust brightness from 10-100%, reducing LED current proportionally to dim the connected light source without flicker.

The white ABS casing includes captive screw terminals for mains input, DC output and the separate 1-10V control wire pair, allowing secure connection without soldering. The driver operates on 220-240V AC mains and includes short-circuit, overload and thermal protection to prevent damage if the output is inadvertently shorted or if connected LEDs draw excessive current. The IP20 rating requires the driver to be installed in dry indoor locations away from direct water contact.

Specification
Length (mm) 135
Projection (mm) 30
Dimmable Yes
IP Rating IP20
Warranty 5 Years
Frequently Asked

What dimming protocol does this driver use?

The Eris uses 1-10V analogue dimming, which requires a separate 1-10V controller or compatible wall dimmer connected to the control wire terminals. The driver will not dim via mains phase-cut dimmers.

What LED modules can this driver power?

It powers constant current LED modules rated at 350mA, typically between 28-30V DC forward voltage, totalling up to 10W. Check the LED module's current rating before connecting to ensure compatibility.

Can it be installed in bathrooms?

The IP20 rating means it must be installed in a dry location outside bathroom zones 0, 1 and 2. It can be installed in a ceiling void above a bathroom provided the void itself is dry and well-ventilated.

What happens if the output is shorted?

The driver includes short-circuit protection which cuts power to the output if a short is detected, preventing damage to the driver. The connection must be corrected and the driver reset by cycling mains power.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Eris is a 10W constant current LED driver with 1-10V analogue dimming protocol, housed in a 135mm white plastic casing rated IP20. It converts mains voltage to a stable DC current output, typically 350mA at 28-30V DC, allowing it to power single LED modules or strings of low-wattage LED chips that require constant current rather than constant voltage.

    Designed for installation behind LED downlights, panel lights, strip lighting and architectural LED fixtures in residential and commercial interiors, the driver's compact 135mm x 30mm footprint fits into ceiling voids and back boxes with restricted depth. The 1-10V dimming protocol requires a separate 1-10V controller or compatible wall dimmer to adjust brightness from 10-100%, reducing LED current proportionally to dim the connected light source without flicker.

    The white ABS casing includes captive screw terminals for mains input, DC output and the separate 1-10V control wire pair, allowing secure connection without soldering. The driver operates on 220-240V AC mains and includes short-circuit, overload and thermal protection to prevent damage if the output is inadvertently shorted or if connected LEDs draw excessive current. The IP20 rating requires the driver to be installed in dry indoor locations away from direct water contact.

    Specification
    Length (mm) 135
    Projection (mm) 30
    Dimmable Yes
    IP Rating IP20
    Warranty 5 Years
    Frequently Asked

    What dimming protocol does this driver use?

    The Eris uses 1-10V analogue dimming, which requires a separate 1-10V controller or compatible wall dimmer connected to the control wire terminals. The driver will not dim via mains phase-cut dimmers.

    What LED modules can this driver power?

    It powers constant current LED modules rated at 350mA, typically between 28-30V DC forward voltage, totalling up to 10W. Check the LED module's current rating before connecting to ensure compatibility.

    Can it be installed in bathrooms?

    The IP20 rating means it must be installed in a dry location outside bathroom zones 0, 1 and 2. It can be installed in a ceiling void above a bathroom provided the void itself is dry and well-ventilated.

    What happens if the output is shorted?

    The driver includes short-circuit protection which cuts power to the output if a short is detected, preventing damage to the driver. The connection must be corrected and the driver reset by cycling mains power.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.