Erin Wood LED Floor Lamp 26W 3000K - Light Brown

The Erin is a 1.56m LED floor lamp built around a light brown natural wood column set on a matt black painted metal base. An integrated 26W LED runs the length of the wood column behind a satin opal polycarbonate diffuser, turning the entire 1.56m height into a continuous source of warm 3000K light.

Designed for living rooms, reading corners and offices where ambient light is needed without a ceiling fitting, the Erin provides diffused vertical wash light rather than directional task light. The opal polycarbonate diffuser softens the LED output across its full height, preventing glare when viewed from the side and creating a visual column of light against a wall or in a corner. The 150mm x 220mm footprint occupies minimal floor space, making the lamp suitable for tight alcoves and the sides of furniture where a traditional lampshade fitting would protrude too far.

The natural wood column shows visible grain variation depending on the section of timber used, so tonal differences between individual pieces are normal. The matt black base provides a clean visual stop and adds enough weight to stabilise the tall column without requiring wall mounting. The 3m transparent PVC cable runs down the back of the column and exits at the base, keeping the cable run visible but unobtrusive against skirting boards. The lamp is dimmable when paired with a compatible LED dimmer.

Is the Erin dimmable?

Yes. The integrated 26W LED is dimmable when connected to a compatible LED dimmer. Dimmer compatibility depends on the specific dimmer model — check with the dimmer manufacturer or contact Niori before pairing to confirm.

Does the wood colour vary between pieces?

Yes. Each Erin uses natural wood cut from different sections of timber, so grain pattern and tonal variation differ between individual lamps. This is a characteristic of natural wood, not a manufacturing defect.

What kind of light does it produce?

The Erin produces diffused ambient light along the full 1.56m height rather than directional task light. The opal polycarbonate diffuser spreads the LED output evenly, creating a soft vertical wash suitable for general room lighting or background illumination in corners and alcoves.

Can it be used in bathrooms?

No. The IP20 rating means the lamp is rated for dry indoor use only and is not protected against moisture. It is not suitable for bathrooms, outdoor areas or any location where it may be exposed to water or high humidity.