Free Delivery on all orders over £99*
Save 17%

Ecliptus LED Strip Linear Connector - White Plastic

£199
RRP £240
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Ecliptus is a white plastic linear connector for joining two LED strip sections end-to-end without soldering. The connector measures 15mm long by 17mm wide and uses a hinged cover that clips over metal contact pins to secure the strip ends in place. The pins inside the connector maintain electrical contact between the two strip sections, allowing current to pass through.

Designed for LED strip installations where a straight run needs to continue across a corner, around an obstacle, or through a junction box, the connector provides a faster alternative to soldering joints. The hinged cover opens to reveal two contact channels, each strip end slides into one side, and the cover clips down to lock both strips against the pins. No tools are required for fitting, though a sharp blade may be needed to expose the copper pads on the LED strip ends before insertion.

The white plastic body sits flush against most ceiling and wall surfaces when fitted, keeping the connection point low-profile within the strip run. The 15mm length is short enough to fit inside standard aluminium LED strip channels without blocking the diffuser cover. The connector is rated for indoor use and suits most single-colour and RGB LED strips with standard 8mm or 10mm widths, though compatibility should be checked against the specific strip model before purchase.

Specification
Length (mm) 15
Projection (mm) 17
Warranty 5 Years
Frequently Asked

What LED strip widths does this fit?

The Ecliptus connector is designed for standard 8mm and 10mm LED strips. Check the strip width and contact pad layout before purchase to confirm compatibility with this connector model.

Can it be used outdoors?

The connector is rated for indoor use. Outdoor LED strip installations require IP-rated waterproof connectors to prevent moisture ingress at the joint.

Does it work with RGB strips?

The connector supports both single-colour and RGB LED strips, provided the strip width and contact pad configuration match the connector's internal pin layout.

How is it installed?

Cut the LED strip at the designated cutting point, expose the copper contact pads, open the hinged cover on the connector, slide each strip end into one side of the connector, and close the cover to lock the strips against the internal pins. No soldering or tools are required.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Ecliptus is a white plastic linear connector for joining two LED strip sections end-to-end without soldering. The connector measures 15mm long by 17mm wide and uses a hinged cover that clips over metal contact pins to secure the strip ends in place. The pins inside the connector maintain electrical contact between the two strip sections, allowing current to pass through.

    Designed for LED strip installations where a straight run needs to continue across a corner, around an obstacle, or through a junction box, the connector provides a faster alternative to soldering joints. The hinged cover opens to reveal two contact channels, each strip end slides into one side, and the cover clips down to lock both strips against the pins. No tools are required for fitting, though a sharp blade may be needed to expose the copper pads on the LED strip ends before insertion.

    The white plastic body sits flush against most ceiling and wall surfaces when fitted, keeping the connection point low-profile within the strip run. The 15mm length is short enough to fit inside standard aluminium LED strip channels without blocking the diffuser cover. The connector is rated for indoor use and suits most single-colour and RGB LED strips with standard 8mm or 10mm widths, though compatibility should be checked against the specific strip model before purchase.

    Specification
    Length (mm) 15
    Projection (mm) 17
    Warranty 5 Years
    Frequently Asked

    What LED strip widths does this fit?

    The Ecliptus connector is designed for standard 8mm and 10mm LED strips. Check the strip width and contact pad layout before purchase to confirm compatibility with this connector model.

    Can it be used outdoors?

    The connector is rated for indoor use. Outdoor LED strip installations require IP-rated waterproof connectors to prevent moisture ingress at the joint.

    Does it work with RGB strips?

    The connector supports both single-colour and RGB LED strips, provided the strip width and contact pad configuration match the connector's internal pin layout.

    How is it installed?

    Cut the LED strip at the designated cutting point, expose the copper contact pads, open the hinged cover on the connector, slide each strip end into one side of the connector, and close the cover to lock the strips against the internal pins. No soldering or tools are required.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.