Description
The Denby is a four light semi-flush bathroom ceiling light with glass shades set around a wide circular plate, available in chrome or brass to suit different bathroom schemes. It measures 66cm across with a 19.4cm projection, so it sits fairly close to the ceiling while still covering a good area overhead. Each of the four lamps takes a G9 fitting rated up to 3W, and the glass shades keep the look clean and simple. It carries an IP44 rating, so it is built for bathroom use.
A wide spread across four lamps makes the Denby a good choice for larger bathrooms or a bathroom with a low or standard ceiling, where you want an even level of ambient light rather than one central bulb. It suits family bathrooms, en suites and larger shower rooms alike, and works well above a vanity area or in the centre of the room. Choose chrome for a bright, cool look that matches most bathroom fittings, or brass for a warmer tone against tiles and stone.
We offer the Denby in chrome or brass, both paired with simple glass shades that wipe clean easily. Go over the glass and metalwork with a dry or lightly damp soft cloth, and dry it off rather than letting water sit on the fitting. With an IP44 rating, it is built for bathroom use outside of the immediate splash zones around a bath or shower, so it suits a position such as zone 2 or a ceiling well away from the water. It takes four G9 lamps, not included, and it is dimmable with compatible lamps and a suitable dimmer, and it sits within our wider Denby range.
Specification
| Bulb Fitting |
4 x G9 |
| Maximum Wattage |
12W (3W per lamp) |
| Dimmable |
Yes |
| IP Rating |
IP44 |
| Class |
Class 2 (double insulated) |
| Width |
660mm |
| Projection |
194mm |
| Weight |
2kg |
| Materials |
Glass |
| Finish |
Brass |
| Warranty |
2 Year |
Downloads
Instruction Manual (PDF)
Frequently Asked
What size bathroom does the Denby suit?
At 66cm across, it suits larger bathrooms, family bathrooms and en suites well, giving a good, even spread of light across the room.
Is the Denby suitable for a bathroom?
Yes, it carries an IP44 rating, so it is suitable for a bathroom outside of the immediate splash zones around a bath or shower, such as zone 2 or a ceiling position further from the water.
What finishes are available?
It comes in chrome or brass, both paired with the same glass shades, so you can match it to your existing bathroom fittings.
What bulbs does it take, and are they included?
It takes four G9 lamps rated up to 3W each, which are not included. Warm white G9 LED lamps are a good option for a soft, even light.
How do I clean the Denby?
Wipe the glass and metalwork over with a dry or lightly damp soft cloth, then dry it off rather than leaving water sitting on the fitting.