Description
A ring of LED light sits behind a waterfall of hundreds of fine chains on this contemporary pendant, so the source is softened and scattered into a shimmering fall of light. Plated in polished chrome, the chains catch and reflect the glow, giving movement and sparkle without a hard glare. It measures 450mm across and hangs on an adjustable drop from 500mm to 1700mm. The LED is integrated, so there are no separate bulbs to fit or replace, and the fitting is ready to light straight from installation.
The soft, diffused sparkle of the Danestead suits modern and glamorous interiors, working well over a dining table, in a bedroom or in a hallway where the cascade of chains can be seen from below. It makes a gentle focal point rather than a bright task light, so it pairs nicely with other lighting in a layered scheme. At 450mm across it fits comfortably in medium rooms as well as larger spaces, and the chain detail gives it presence without a bulky solid shade.
The chains and ring are polished chrome plated, giving a bright, reflective surface that carries the diffused light. It is a Class 2 double insulated fitting, so no earth connection is required, though a qualified electrician should still install it, and the IP20 rating keeps it to dry indoor rooms. Because the LED is integrated it runs cool and is designed to last, keeping maintenance low. To care for it, switch off and dust the chains gently, then wipe the chrome with a soft, dry cloth, avoiding sprays that could tangle or mark the fine chains.
Specification
| IP Rating |
IP20 |
| Class |
Class 2 (double insulated) |
| Height |
500-1700mm |
| Diameter |
450mm |
| Finish |
chrome |
| Warranty |
2 Year |
Downloads
Instruction Manual (PDF)
Frequently Asked
Does it need separate bulbs?
No. The LED is integrated behind the ring, so there are no bulbs to buy or replace. It is ready to light once installed.
What creates the shimmering effect?
Hundreds of fine polished chrome chains hang in front of the LED ring, scattering the light into a soft, sparkling waterfall.
Does it need an earth connection?
No. It is a Class 2 double insulated fitting, so no earth is required, though it should still be fitted by a qualified electrician.
How do I clean the chains?
Switch off and dust the chains gently, then wipe the chrome with a soft, dry cloth. Avoid sprays that could tangle the fine chains.