Cumbuco II Round CCT LED Flush Ceiling Light 30W - White

The Cumbuco II is a 380mm diameter round flush ceiling light with an integrated 30W LED and switchable colour temperature control. A white metal rim frames an opal acrylic diffuser that sits flush to the ceiling, projecting 68mm below the mounting point. The CCT function allows switching between 2700K extra warm, 3300K warm and 4000K cool white via a wall switch sequence, giving flexibility to adjust the light tone to match room use or time of day.

Designed for hallways, bedrooms, small bathrooms and utility rooms where ceiling height is limited or a low-profile fitting is preferred, the 2200 lumen output at 30W provides general illumination across a 10-12m² area. The 145° beam angle gives even light distribution without visible hotspots, and the flush mounting sits tight to the ceiling without a visible canopy gap. Non-dimmable, so the light is controlled via a standard on/off switch, with colour temperature changed by toggling the switch in a specific sequence.

The white finish on the rim pairs cleanly with white ceilings and modern or minimalist interiors, and the opal diffuser conceals the LED array inside while softening the light output. The 68mm depth allows installation on standard ceiling heights without reducing headroom noticeably, and the 1kg weight fits securely onto typical ceiling fixings. The acrylic diffuser is removable for cleaning or LED module replacement if needed within the 3-year warranty period.

How do I change the colour temperature?

The CCT function switches between 2700K, 3300K and 4000K by toggling the wall switch in a specific sequence (typically turning on, off, on within a few seconds). The light remembers the last colour temperature setting used. Check the installation manual for the exact switching pattern.

Is this suitable for low ceilings?

Yes. The 68mm projection from the ceiling makes this a good choice for rooms with lower ceiling heights (2.3-2.4m) or anywhere a bulkier pendant would reduce headroom noticeably. It sits flush without a visible gap around the mounting point.

What room size does it cover?

The 2200 lumen output at 30W provides general illumination for rooms up to approximately 10-12m². This suits most single bedrooms, bathrooms, hallways and utility rooms. Larger spaces may benefit from multiple fittings or a higher-output model.

Can the LED be replaced?

The LED module is integrated rather than user-replaceable in the traditional sense, but the unit is designed for long-life LED performance (typically 20,000+ hours). If the LED fails within the 3-year warranty, contact Mantra or Niori for replacement or repair options.