Free Delivery on all orders over £99*
Save 30%

Clarionis LED Strip Holder - White Steel, 10m

£13899
RRP £19800
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Clarionis is a 10m continuous steel mounting track designed to hold LED strip lights flush against walls and ceilings. The white powder-coated finish provides a continuous 60mm-wide channel that conceals the LED strip adhesive backing and presents a clean installed edge. The steel construction allows the track to be cut to exact lengths on site and supports the weight of standard LED strip products without sagging over long runs.

Designed for residential, office and retail lighting installations where LED strips need to run in straight lines across walls, under cabinets, along cornices or within cove lighting details, the Clarionis track mounts using screws or adhesive (fixings not included) and clips the LED strip into a recessed channel. The 60mm projection means the track sits 6cm proud of the mounting surface, providing clearance for the LED strip's power cable to run behind the holder without visible loops or cable ties.

The white finish integrates with white or light-toned ceilings and walls, reducing the visual presence of the mounting hardware when the lights are off. The 10m length arrives as a single continuous piece, allowing uninterrupted runs up to that length without joins. For projects requiring longer runs, multiple holders can be butted end-to-end, though a small join line will be visible at each connection point. The steel can be cut with standard metalworking tools to fit exact room dimensions.

Specification
Length (mm) 10264
Projection (mm) 60
Warranty 5 Years
Frequently Asked

What LED strip widths does it accept?

The Clarionis holder is designed for standard 10mm-wide LED strip lights. The recessed channel clips the strip in place and hides the adhesive backing. Verify your LED strip width before ordering.

Can the track be cut to size?

Yes. The steel track can be cut using a hacksaw, angle grinder or metalworking shears to fit exact installation lengths. Cut edges should be deburred before mounting the LED strip to avoid damaging the strip's backing.

How is it mounted?

The holder mounts using screws or adhesive. Fixings are not included. For screw mounting, pre-drill the steel track at intervals of 300-500mm along the length. For adhesive mounting, use a strong double-sided mounting tape rated for the combined weight of the holder and LED strip.

Does it come with the LED strip?

No. This is the mounting track only. LED strips, power supplies, connectors and fixings are sold separately. See the LED Strip Lights category at Niori for compatible products.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Clarionis is a 10m continuous steel mounting track designed to hold LED strip lights flush against walls and ceilings. The white powder-coated finish provides a continuous 60mm-wide channel that conceals the LED strip adhesive backing and presents a clean installed edge. The steel construction allows the track to be cut to exact lengths on site and supports the weight of standard LED strip products without sagging over long runs.

    Designed for residential, office and retail lighting installations where LED strips need to run in straight lines across walls, under cabinets, along cornices or within cove lighting details, the Clarionis track mounts using screws or adhesive (fixings not included) and clips the LED strip into a recessed channel. The 60mm projection means the track sits 6cm proud of the mounting surface, providing clearance for the LED strip's power cable to run behind the holder without visible loops or cable ties.

    The white finish integrates with white or light-toned ceilings and walls, reducing the visual presence of the mounting hardware when the lights are off. The 10m length arrives as a single continuous piece, allowing uninterrupted runs up to that length without joins. For projects requiring longer runs, multiple holders can be butted end-to-end, though a small join line will be visible at each connection point. The steel can be cut with standard metalworking tools to fit exact room dimensions.

    Specification
    Length (mm) 10264
    Projection (mm) 60
    Warranty 5 Years
    Frequently Asked

    What LED strip widths does it accept?

    The Clarionis holder is designed for standard 10mm-wide LED strip lights. The recessed channel clips the strip in place and hides the adhesive backing. Verify your LED strip width before ordering.

    Can the track be cut to size?

    Yes. The steel track can be cut using a hacksaw, angle grinder or metalworking shears to fit exact installation lengths. Cut edges should be deburred before mounting the LED strip to avoid damaging the strip's backing.

    How is it mounted?

    The holder mounts using screws or adhesive. Fixings are not included. For screw mounting, pre-drill the steel track at intervals of 300-500mm along the length. For adhesive mounting, use a strong double-sided mounting tape rated for the combined weight of the holder and LED strip.

    Does it come with the LED strip?

    No. This is the mounting track only. LED strips, power supplies, connectors and fixings are sold separately. See the LED Strip Lights category at Niori for compatible products.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.