Free Delivery on all orders over £99*
Save 30%

Clarionis LED Strip Holder - Grey Steel, 10m

£13899
RRP £19800
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Clarionis is a 10m continuous steel mounting track designed to hold LED strip lighting in recessed channels, surface runs or under-cabinet installations. The holder provides a 60mm projection from the mounting surface, creating a defined recess that conceals the LED strip behind the track edge and directs light output downward or forward depending on orientation.

Designed for both residential under-cabinet lighting and commercial linear runs in retail, hospitality or office settings, the holder accepts LED strips up to the full 10m length without requiring intermediate support brackets. The steel construction allows the track to be cut to shorter lengths on site using metalwork tools, making it adaptable to kitchen worktop runs, shelf lighting, cove lighting or architectural accent installations where rigid mounting is needed.

The grey powder-coated finish on the steel provides a neutral tone that recedes visually once installed, keeping attention on the light output rather than the mounting hardware. The 60mm projection suits standard 12V and 24V LED strip widths, with enough depth to accommodate both single-row and double-row strips. The holder is supplied in a 10m coil that can be straightened during installation or left with a gentle curve to follow non-linear runs.

Specification
Length (mm) 10264
Projection (mm) 60
Warranty 5 Years
Frequently Asked

Can the holder be cut to shorter lengths?

Yes. The steel track can be cut using standard metalworking tools such as a hacksaw or angle grinder. This allows you to fit the holder to kitchen worktop runs, shelving units or architectural features that require lengths shorter than the full 10m supplied.

What width LED strip does it accept?

The 60mm projection suits most standard LED strip widths including single-row strips at 8-12mm wide and double-row strips at 16-20mm wide. Check your specific LED strip dimensions before ordering to confirm fit.

Is it suitable for outdoor use?

The holder is steel with a powder-coated grey finish but does not carry an IP rating. It is designed for indoor installation in dry locations. For outdoor or damp-location LED strip mounting, consider holders with IP65 or higher ratings.

How is the holder fixed to the mounting surface?

The holder is typically fixed using screws through pre-drilled holes or adhesive backing depending on the installation surface. The exact fixing method depends on whether you are mounting into timber, plasterboard, masonry or metal substrates.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Clarionis is a 10m continuous steel mounting track designed to hold LED strip lighting in recessed channels, surface runs or under-cabinet installations. The holder provides a 60mm projection from the mounting surface, creating a defined recess that conceals the LED strip behind the track edge and directs light output downward or forward depending on orientation.

    Designed for both residential under-cabinet lighting and commercial linear runs in retail, hospitality or office settings, the holder accepts LED strips up to the full 10m length without requiring intermediate support brackets. The steel construction allows the track to be cut to shorter lengths on site using metalwork tools, making it adaptable to kitchen worktop runs, shelf lighting, cove lighting or architectural accent installations where rigid mounting is needed.

    The grey powder-coated finish on the steel provides a neutral tone that recedes visually once installed, keeping attention on the light output rather than the mounting hardware. The 60mm projection suits standard 12V and 24V LED strip widths, with enough depth to accommodate both single-row and double-row strips. The holder is supplied in a 10m coil that can be straightened during installation or left with a gentle curve to follow non-linear runs.

    Specification
    Length (mm) 10264
    Projection (mm) 60
    Warranty 5 Years
    Frequently Asked

    Can the holder be cut to shorter lengths?

    Yes. The steel track can be cut using standard metalworking tools such as a hacksaw or angle grinder. This allows you to fit the holder to kitchen worktop runs, shelving units or architectural features that require lengths shorter than the full 10m supplied.

    What width LED strip does it accept?

    The 60mm projection suits most standard LED strip widths including single-row strips at 8-12mm wide and double-row strips at 16-20mm wide. Check your specific LED strip dimensions before ordering to confirm fit.

    Is it suitable for outdoor use?

    The holder is steel with a powder-coated grey finish but does not carry an IP rating. It is designed for indoor installation in dry locations. For outdoor or damp-location LED strip mounting, consider holders with IP65 or higher ratings.

    How is the holder fixed to the mounting surface?

    The holder is typically fixed using screws through pre-drilled holes or adhesive backing depending on the installation surface. The exact fixing method depends on whether you are mounting into timber, plasterboard, masonry or metal substrates.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.