Description
The Citronic SMS002 is a professional microphone boom arm built for studio and broadcasting work. It clamps to your desk and holds your microphone up and out of the way, keeping your working surface clear while you record, stream or broadcast. The arm uses spring retraction for quick, smooth positioning, so you can move the mic where you need it and it stays put.
A lockable hinge adds a bit of safety, letting you fix the arm in place once you have it set. The whole arm rotates a full 360°, so you can angle the microphone from almost any direction around your seat. It fits desks with a maximum depth of 50mm, and the clamp aperture matches that at 50mm, so check your desk edge before ordering. A microphone clip is supplied in the box.
Finished in black, the SMS002 keeps a low profile on camera and sits neatly alongside the rest of your studio kit. It suits podcasting, voiceover, gaming and general recording where you want the mic close but the desk clear. Note that this is a desk-mounted boom arm rather than a floor stand, so it relies on a suitable desk edge to clamp onto. Fit your microphone into the supplied clip, thread any cable along the arm, and you have a tidy, adjustable setup ready to go.
Specification
| Weight |
0.69KG |
| Max. weight load |
0.55KG |
| Horizontal reach |
1010mm max. |
| Vertical reach |
990mm max. |
| Thread adaptor |
5/8" |
| Colour |
Black |
| Clamp aperture |
50mm |
Frequently Asked
How does the arm hold its position?
It uses spring retraction for smooth movement, plus a lockable hinge so you can fix the arm in place once set.
What desks does it fit?
It clamps to desks with a maximum depth of 50mm, matching the 50mm clamp aperture. Measure your desk edge before ordering.
Is a microphone clip included?
Yes, a microphone clip is supplied in the box.
How far does it rotate?
The arm rotates a full 360° around the clamp.
Is this a floor stand or a desk stand?
It is a desk-mounted boom arm that clamps to your desk edge, not a floor-standing model.