Bologna 1 Light Pedestal Outdoor Light - Black IP54

The Bologna is a 435mm outdoor pedestal light built around a clear acrylic globe shade housed within a black powder-coated metal frame. The fitting stands on a stepped square base and uses a single E27 bulb (sold separately, up to 60W) positioned centrally within the globe. The IP54 rating protects against dust ingress and water splashes from any direction, making the fitting suitable for gate posts, boundary walls, driveway pillars and garden borders.

Designed for residential front gardens, driveways and commercial pathways where both illumination and a visible design feature are wanted, the Bologna provides 360-degree light distribution through the clear globe. The 250mm width means a pair can be installed on standard 300mm-wide pillars without overhanging the edges. The pedestal mount requires a flat horizontal surface and fixing through the base plate — typically bolted to the top of a masonry pillar, brick pier or wooden post cap.

The black powder-coated finish on the metal frame and base resists UV degradation and corrosion in wet outdoor conditions. The clear acrylic globe shows the bulb directly when lit, so visible-filament LED bulbs or traditional carbon-filament bulbs create a more decorative effect than opaque LED bulbs. The arched cage structure around the globe protects the acrylic from minor knocks while allowing unrestricted light output. Norlys backs this fitting with a 5-year guarantee covering manufacturing defects and finish degradation.

What does the IP54 rating mean?

IP54 means the fitting is protected against dust ingress (not fully dust-tight but sufficient for most outdoor environments) and can handle water splashes from any direction. This makes it suitable for exposed outdoor positions including open pathways, uncovered pillars and gate posts.

What bulb should I use?

The fitting takes a standard E27 bulb up to 60W. Since the clear globe shows the bulb directly when lit, a visible-filament LED bulb or traditional carbon-filament bulb creates a more decorative effect than a standard opaque LED. Most users pair this with a 6-8W warm-white LED bulb (2700K-3000K) for pathway lighting.

How is it mounted?

The Bologna mounts through the square base plate onto a flat horizontal surface — typically the top of a masonry pillar, brick pier or wooden post cap. The base plate has fixing holes for screws or bolts depending on the substrate. The fitting requires mains 230V wiring run through the pillar or post.

Can it be used on a wooden post?

Yes, provided the post is capped with a flat surface at least 250mm square and the mains cable is run safely through the post interior or in external conduit. The fitting itself does not require earthing to the post, but the electrical installation must comply with Part P building regulations for outdoor wiring.