Free Delivery on all orders over £99*
Save 29%

Blazewood 25W 24V Constant Voltage LED Driver IP67

£6799
RRP £9600
The RRP is the manufacturer's recommended retail price of the item.
17 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Blazewood is a 25W constant voltage LED driver delivering 24V DC output from 230V AC mains, housed in a white plastic enclosure rated IP67 for outdoor installation. The driver converts mains voltage to stable low-voltage DC suitable for LED strip lights, LED modules and other 24V DC LED systems requiring up to 25W total load.

Designed for outdoor architectural lighting, garden path lighting, deck and patio installations, and any IP67-rated LED strip or module system, the driver fits behind external wall lights, under decking, inside external soffit boxes, and in shallow recessed fittings where space is limited. The 148mm x 40mm body is narrow enough to fit inside typical outdoor light fixtures and accessory boxes. The IP67 rating provides protection against dust ingress and temporary water immersion up to 1m depth for 30 minutes, making it suitable for installations exposed to rain, snow and garden irrigation overspray.

The white plastic enclosure houses the transformer and rectifier circuit, with cable entries sealed with rubber grommets to maintain the IP67 rating. Input and output cables exit from opposite ends of the driver, keeping mains and low-voltage wiring separated. The non-dimmable output provides constant 24V regardless of mains voltage fluctuation within normal UK grid tolerances, ensuring consistent LED brightness and colour temperature. The driver generates minimal heat during operation, contributing to longer service life for both the driver itself and the connected LED load.

From Ideal Lux, an Italian lighting manufacturer supplying architectural and decorative lighting across Europe. The driver carries a 5-year warranty covering manufacturing defects and component failure under normal operating conditions.

Specification
Length (mm) 148
Projection (mm) 40
Dimmable No
IP Rating IP67
Warranty 5 Years
Frequently Asked

What's the maximum LED load this driver can power?

The driver delivers 25W at 24V DC, which equates to approximately 1.04A maximum current draw. Most 24V LED strip is rated in watts per metre, so a 10W/m strip can run approximately 2.5m on this driver. Always calculate total wattage of the connected LED load and stay below 25W to avoid overloading.

Can it be used indoors?

Yes. The IP67 rating makes it suitable for both indoor and outdoor installation. Indoors it works in bathrooms, kitchens, utility rooms and anywhere moisture resistance is beneficial, though it's often oversized for typical dry indoor installations where IP20 drivers suffice.

Is the driver dimmable?

No. The output is constant voltage at 24V and cannot be dimmed via mains dimmers or low-voltage PWM dimmers. For dimmable 24V LED systems, a dimmable driver or a separate PWM controller is required.

How is it wired?

The driver has four cable tails: two for 230V AC mains input (live and neutral, plus earth if metal enclosure) and two for 24V DC output (positive and negative). The mains input must be wired by a qualified electrician in compliance with BS 7671 wiring regulations. The 24V output connects to the LED strip or module positive and negative terminals, observing correct polarity to avoid damaging the LEDs.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Blazewood is a 25W constant voltage LED driver delivering 24V DC output from 230V AC mains, housed in a white plastic enclosure rated IP67 for outdoor installation. The driver converts mains voltage to stable low-voltage DC suitable for LED strip lights, LED modules and other 24V DC LED systems requiring up to 25W total load.

    Designed for outdoor architectural lighting, garden path lighting, deck and patio installations, and any IP67-rated LED strip or module system, the driver fits behind external wall lights, under decking, inside external soffit boxes, and in shallow recessed fittings where space is limited. The 148mm x 40mm body is narrow enough to fit inside typical outdoor light fixtures and accessory boxes. The IP67 rating provides protection against dust ingress and temporary water immersion up to 1m depth for 30 minutes, making it suitable for installations exposed to rain, snow and garden irrigation overspray.

    The white plastic enclosure houses the transformer and rectifier circuit, with cable entries sealed with rubber grommets to maintain the IP67 rating. Input and output cables exit from opposite ends of the driver, keeping mains and low-voltage wiring separated. The non-dimmable output provides constant 24V regardless of mains voltage fluctuation within normal UK grid tolerances, ensuring consistent LED brightness and colour temperature. The driver generates minimal heat during operation, contributing to longer service life for both the driver itself and the connected LED load.

    From Ideal Lux, an Italian lighting manufacturer supplying architectural and decorative lighting across Europe. The driver carries a 5-year warranty covering manufacturing defects and component failure under normal operating conditions.

    Specification
    Length (mm) 148
    Projection (mm) 40
    Dimmable No
    IP Rating IP67
    Warranty 5 Years
    Frequently Asked

    What's the maximum LED load this driver can power?

    The driver delivers 25W at 24V DC, which equates to approximately 1.04A maximum current draw. Most 24V LED strip is rated in watts per metre, so a 10W/m strip can run approximately 2.5m on this driver. Always calculate total wattage of the connected LED load and stay below 25W to avoid overloading.

    Can it be used indoors?

    Yes. The IP67 rating makes it suitable for both indoor and outdoor installation. Indoors it works in bathrooms, kitchens, utility rooms and anywhere moisture resistance is beneficial, though it's often oversized for typical dry indoor installations where IP20 drivers suffice.

    Is the driver dimmable?

    No. The output is constant voltage at 24V and cannot be dimmed via mains dimmers or low-voltage PWM dimmers. For dimmable 24V LED systems, a dimmable driver or a separate PWM controller is required.

    How is it wired?

    The driver has four cable tails: two for 230V AC mains input (live and neutral, plus earth if metal enclosure) and two for 24V DC output (positive and negative). The mains input must be wired by a qualified electrician in compliance with BS 7671 wiring regulations. The 24V output connects to the LED strip or module positive and negative terminals, observing correct polarity to avoid damaging the LEDs.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.