Description
Fitting our Asteria Short LED Wall Light takes around 10 minutes, and because it is hardwired there is no visible cable on the outside of the fitting once it is in place. It connects directly to your mains supply, so we would ask you to refer to the hardwire user guide for full instructions on wiring it safely. A round wall plate holds a short straight arm that carries a flat circular disc shade, and this disc sits parallel to the wall for a low, tidy profile. At 15cm in diameter, 9.6cm high and 27.8cm deep, it keeps close to the wall while still casting light where you want it.
The built-in 12W panel gives 500 lumen at a warm 2700K, with a CRI of 91 for accurate colour rendering, and it is rated for 50000 light hours. This lamp is dimmable, so we find it works equally well as gentle bedside light or as a brighter reading source when you turn it up. It carries CE, UKCA, WEEE and IP2X markings and is intended for indoor use, and we back it with a 10-year warranty. Our Asteria is one option within a wider range, and this particular light is finished in Pearl White over a Steel core.
This piece is made from steel, aluminium and acrylic, and the Pearl White finish gives the disc shade a soft, clean look that suits most walls without drawing too much attention to itself. The flat disc and short arm make it a good choice for hallways, alcoves and either side of a bed, where a deep fitting would feel intrusive. We would pair it with warm-toned walls and simple furniture to let the round form read clearly. Keep it looking its best by wiping the surface with a soft, dry cloth whenever it needs a little care.
Specification
| Assembly Time |
10min |
| Height |
9.6cm |
| Depth |
27.8cm |
| Diameter |
15cm |
| Material |
Steel, aluminium and acrylic (Not Hardwired is incl. 2.2m black cord) |
| Markings, Tests & Certifications |
CE, UKCA, WEEE and IP2X (for indoor use) |
| Additional Information |
Please refer to the hardwire user guide for instructions on how to hardwire the Asteria Wall |
| Warranty |
10-year warranty |
| Lumen |
500 lumen |
| Light Hours |
50000 |
| Light Information |
CRI: 91 2700K |
| Light Source |
12W panel built-in |
| Dimmable |
This lamp is dimmable |
Downloads
Product Specifications
User Guide
Product Information Sheet
Driver Specification Sheet
Hardwire User Guide
Frequently Asked
How is the Asteria Wall Light fitted?
This version is hardwired, so it connects directly to your mains supply with no external cable visible on the fitting. Please refer to the hardwire user guide for full instructions before installation.
What are the dimensions of this wall light?
The disc shade measures 15cm in diameter, with a height of 9.6cm and a depth of 27.8cm from the wall. Assembly takes around 10 minutes.
What materials is it made from?
It is made from steel, aluminium and acrylic, finished in Pearl White over a steel core.
How bright is it and can I dim it?
The built-in 12W panel gives 500 lumen at a warm 2700K with a CRI of 91, and the lamp is dimmable.
How long will the light source last?
The built-in panel is rated for 50000 hours of use.
Is this light suitable for outdoor use?
No, it is rated IP2X for indoor use only. It carries CE, UKCA and WEEE markings.