Description
This is a 4W E14 LED bulb that puts out a warm white light from a compact round golf-ball shape. The colour sits at 2700K and it reaches 470 lumens. This is a non-dimmable bulb, made for use on a standard switch rather than a dimmer. Keeping a spare on hand means you can swap a bulb the moment one comes to the end of its life. The light reaches full brightness the moment you switch it on, with no warm-up delay. LED bulbs like this use far less power than the old incandescent bulbs they replace, which keeps bills down.
The E14 cap suits chandeliers, wall lights and small pendants. Warm white light like this feels settled and homely, which suits living spaces, bedrooms and dining areas. It suits decorative fittings around the home where you want a steady, reliable light.
The bulb uses a standard E14 small Edison screw cap, so it screws straight into any fitting made for E14 bulbs with no adaptor needed. Behind the clear glass you can see the LED filament, which gives the look of a traditional bulb with the low running costs of LED. To keep it at its best, switch it off, let it cool and wipe it with a soft dry cloth; avoid water and harsh cleaners. Because it runs cool and sips power, it is a sensible choice for fittings that stay on for long spells. You will find our 4W E14 LED filament golf bulb in our wider range of LED bulbs, so you can match caps and colour tones across a room.
Specification
| Cap/Fitting |
E14 |
| Wattage |
4W |
| Dimmable |
No |
| Bulb Shape |
golf |
| Pack Size |
single |
Frequently Asked
What fitting does this bulb use?
It has an E14 small Edison screw cap, so it fits any light made for E14 bulbs. Check the old bulb or the fitting is marked E14 before you order.
Will I see the filament inside?
Yes. The clear glass shows the LED filament, so you get the look of a traditional bulb. It works best in open or clear-glass fittings where the bulb is on show.
What colour is the light?
It gives a warm white light at 2700K that feels soft and homely. It is not dimmable, so use it with a standard on/off switch.
How should I clean it?
Switch it off and let it cool first, then wipe it with a soft dry cloth. Keep water and abrasive cleaners away, and hold the base rather than the glass when you fit it.