Description
The Delta LED is a slim rectangular wall bar that casts light in two directions at once, up the wall above and down over the surface below. The body is a powder-coated aluminium extrusion in a cement finish, its lightly textured stone-effect surface reading as a soft grey block, 300mm long and 90mm tall, projecting 45mm from the wall. Behind a shiny opal polycarbonate face sits a built-in LED whose glow the diffuser spreads into an even band rather than a visible strip of diodes.
That paired up and down wash is what shapes a room. Light grazing upward lifts the wall plane and adds a sense of height, while the downward spread lands on a console, a headboard or a run of hallway beneath. The opal face keeps the output soft and continuous, so the wall reads as a warm glow close to the surface instead of a hard line. The cement finish gives the bar a matt, mineral look that suits pared-back and textured interiors alike. At 300mm this is the shortest size, suited to a narrow wall beside a door or bed.
The light is a built-in LED drawing 10W for 1100 lumens at 3000K warm white, with a colour rendering index above 90 and a 50,000 hour life, so tones stay true and no bulb is ever bought or replaced. We supply it ready to wire in. Rated IP20 for dry indoor rooms.
Specification
| Number of lights |
1 |
| Light source |
Integrated LED, 10W total (1100lm, 3000K, CRI>90, 50,000h, included) |
| Colour temperature |
3000K (warm white) |
| Length |
300mm |
| Height |
90mm |
| Projection |
45mm |
| Emission |
Up and down |
| IP rating |
IP20 (indoor) |
| Dimmable |
No |
| Frame / Structure finish |
Cement-effect powder-coated aluminium |
| Materials |
Powder-coated aluminium body, opal polycarbonate diffuser |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Delta LED give?
A warm 3000K two-way wash. The bar sends light up the wall and down over the surface below, and the opal polycarbonate face spreads the built-in LED into an even band rather than a visible strip. A colour rendering index above 90 keeps colours true, and the effect grazes the plane it sits on rather than throwing one bright spot.
Does it need bulbs?
No. A built-in LED drawing 10W for 1100 lumens is included, so there is nothing separate to fit. The module is rated for around a 50,000 hour life of normal use.
Can it be dimmed?
The driver is not listed as dimmable, so it holds a fixed warm 3000K output unless a compatible switch is confirmed. We are happy to advise before you order.
How big is it and where does it suit?
The bar is 300mm long, 90mm tall and projects 45mm from the wall, the shortest size in this finish. That slim reach suits a hallway, a bedside or the wall beside a door, where the cement look and the up and down wash both read well.