Description
The Streamlight Dewfall is a 27cm crystal wall light built around a single BC (B22 bayonet cap) bulb fitting mounted on an antique nickel backplate. Strass crystal droplets cascade in layered strands below the bulb, with larger spherical crystals at the bottom and smaller faceted beads forming the upper chains. The crystal assembly projects 11cm from the wall, with the weight concentrated at the base to keep the upper section open.
Designed for hallway alcoves, stairwell landings, dressing rooms and flanking bathroom mirrors, the wall light functions as accent rather than primary illumination. The crystal catches and refracts ambient room light and the bulb glow equally, so placement near windows or opposite reflecting surfaces amplifies the effect. The 21cm width suits narrow wall sections between doors or in recessed panels where a larger fitting would overwhelm the space.
The antique nickel finish on the backplate carries a muted warm tone that sits between polished brass and brushed steel, pairing comfortably with both traditional and transitional interiors. The Strass crystal is precision-cut leaded glass, giving sharper refraction and heavier weight than acrylic or standard glass alternatives. At 1.5kg the fitting needs secure wall fixings into masonry or a timber stud rather than plasterboard alone.
The wall light accepts any BC bulb up to 60W, giving flexibility to choose colour temperature and brightness. A warm-white LED at 4-6W and 2700K suits most installations where the crystal provides decorative focus and a soft wash on the adjacent wall is all that's needed.
Specification
| Finish |
Antique Nickel |
| Diameter |
21cm |
| Height |
27cm |
| Projection |
11cm |
| Number of Lights |
1 |
| Maximum Wattage |
60W |
| Bulb Type |
BC |
| Weight |
1.50KG |
Frequently Asked
Does the wall light come with a bulb?
No. The fitting accepts any BC (B22 bayonet cap) bulb up to 60W maximum. Most users fit a 4-6W warm-white LED bulb at 2700K-3000K for ambient accent lighting rather than task illumination.
What wall fixings are needed?
The fitting weighs 1.5kg, so it requires secure fixings into masonry or a timber stud. Plasterboard fixings alone are not sufficient — locate a stud or use wall plugs rated for the weight.
Can it be used in a bathroom?
The specification does not list an IP rating, so the wall light is not certified for bathroom zones where moisture protection is required. It can be used in dressing rooms, powder rooms or hallways outside regulated bathroom zones.
How is the crystal cleaned?
Switch off and allow the bulb to cool. Wipe each crystal piece with a dry microfibre cloth. For stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the metal chain links or backplate.