Description
The PowerMaster 4ft LED batten is a 1200mm linear ceiling or wall-mounted fitting housing an integrated 36W LED delivering 3,240 lumens at 4000K. The fitting consists of a white powder-coated metal housing with white polycarbonate end caps and an opal plastic diffuser that spreads the light across a 120-degree beam angle, reducing glare and providing even coverage across work surfaces.
Designed for offices, workshops, garages, retail back-of-house areas and classrooms, the batten mounts directly to ceilings or walls via the pre-drilled fixing points on the rear chassis. The fitting comes with a pre-fitted long cable that simplifies first-fix wiring and allows flexibility in positioning relative to ceiling junction boxes. The 4000K colour temperature provides neutral-to-cool white light that aids concentration and task visibility, making it suitable for environments requiring accurate colour perception and prolonged working hours.
The integrated LED cannot be replaced but is rated for approximately 25,000-30,000 hours of operation, equating to roughly 10 years at typical commercial usage (8 hours per day). The CRI of 80 delivers reasonable colour accuracy for general commercial use, though it sits below the 90+ CRI threshold preferred for fine colour-matching work. The IP20 rating limits use to dry indoor environments only — the fitting is not suitable for bathrooms, outdoor canopies or damp storage areas.
The slimline profile of approximately 75mm depth allows the batten to fit in spaces with low ceiling voids or where a less obtrusive fitting is preferred over deeper fluorescent-replacement battens. The white finish integrates cleanly into commercial ceiling planes without drawing visual attention, making it appropriate for installations where function takes priority over decorative presence.
Specification
| Weight (KG) |
0.49 |
| Wattage |
36W |
| Lumen |
3,240 |
| Energy Rating |
G |
| Kelvin |
4,000K |
| Colour Temperature |
Cool White |
| Dimmable |
No |
| Beam Angle |
120 |
| LED or Halogen |
LED |
| IP Rating |
IP20 |
| Zone |
Suitable for use in Zone 3 only |
Frequently Asked
Is the LED replaceable?
No. The LED is integrated into the fitting and cannot be replaced. The unit is rated for approximately 25,000-30,000 hours of operation, after which the entire fitting would need replacing.
Can this be used in a garage or workshop?
Yes, provided the garage or workshop is dry. The IP20 rating means the fitting is not protected against moisture ingress, so it should not be used in damp garages, outdoor canopies or areas where condensation or splashing may occur.
Is it dimmable?
No. The integrated LED driver does not support dimming. Connecting the batten to a dimmer switch will either cause the light to flicker or fail to operate.
What's the physical size?
The batten is approximately 1200mm long (4ft), with a slimline profile of around 75mm depth. The exact width and mounting centres are not stated in the specification, but typical 4ft battens are 60-80mm wide.