Description
The Noctis is a 6cm diameter cylindrical pendant light finished in brushed nickel, housing a single GU10 bulb fitting (bulb sold separately). The metal cylinder measures 400mm in total length and suspends on a 2000mm fabric cable from a matching nickel ceiling rose, giving substantial adjustment range for installation over kitchen worktops, breakfast bars, or side tables.
Designed for task and accent lighting rather than ambient, the Noctis works as a single fitting over a small desk or reading nook, or in runs of three to five pendants spaced along a kitchen island or dining counter. The narrow 60mm diameter and cylindrical form direct light downwards in a focused cone, making it suitable for worktop illumination where a broad wash of light is not needed. The 2m cable allows the pendant to be set anywhere from 300mm to 1500mm below the ceiling depending on ceiling height and the position of the surface below.
The brushed nickel finish provides a mid-tone metallic surface that sits between the warmth of brass and the coolness of polished chrome, pairing comfortably with stainless steel appliances, concrete worktops, and both warm and cool grey colour schemes. The GU10 fitting accepts any standard GU10 LED or halogen bulb up to the maximum wattage shown in the specification, and the pendant is dimmable when paired with a compatible GU10 bulb and dimmer switch. The IP20 rating restricts use to dry indoor locations only.
Specification
| Diameter (mm) |
60 |
| Height (mm) |
400 |
| Cable Length (mm) |
2000 |
| Dimmable |
Yes |
| Number Of Bulbs |
1 |
| Bulb Type |
GU10 |
| IP Rating |
IP20 |
| Warranty |
5 Years |
Frequently Asked
What bulb does the Noctis take?
The pendant takes a standard GU10 bulb, sold separately. Most installations use a GU10 LED between 5-7W and 3000K for warm white task lighting. Check the specification table for the maximum wattage rating.
Is it dimmable?
Yes, when paired with a dimmable GU10 bulb and a compatible dimmer switch. Not all GU10 LEDs are dimmable, so check the bulb specification before purchasing if dimming is required.
How many pendants are needed for a kitchen island?
The 6cm diameter gives a focused downlight rather than a broad wash. For a typical 1800-2400mm kitchen island, three to five Noctis pendants spaced 400-600mm apart provide even task lighting along the worktop.
Can it be used in a bathroom?
No. The IP20 rating restricts the Noctis to dry indoor locations only. It is not suitable for bathrooms or any area where moisture or direct water contact is present.