Energizer 11.5W LED Flush Bathroom Light IP44 4000K Cool White

The Energizer 11.5W LED flush light is a ceiling-mounted fitting with an integrated LED delivering 900 lumens at 4000K cool white through an opal PMMA diffuser. The IP44 rating qualifies the fitting for bathroom Zones 1, 2 and 3, meaning it can be installed above a bath or shower enclosure but not inside the shower tray itself (Zone 0). The white housing measures approximately 300mm in diameter with a low-profile projection that suits rooms with ceiling heights below 2.4m.

Designed for bathrooms, utility rooms, hallways and kitchens where moisture resistance and neutral task lighting are needed, the flush fitting replaces traditional ceiling roses and pendant lights in rooms where downward projection would obstruct movement or reduce headroom. The opal diffuser prevents visible LED hotspots and spreads the 120-degree beam angle evenly across the ceiling plane. Push-in terminals simplify wiring to standard UK mains circuits without needing a separate driver or transformer.

The 4000K colour temperature produces a neutral cool white that sits between warm domestic lighting and the stark clinical white of commercial spaces. At 78.3 lumens per watt, the 11.5W fitting matches the output of a traditional 60-75W incandescent bulb while drawing less than a fifth of the power. The removable silver trim ring allows the fitting to be painted or swapped for different finishes without rewiring. The 0.9 power factor reduces reactive power draw on the circuit, which can be relevant in installations with multiple LED fittings on the same ring.

Which bathroom zones can this be fitted in?

The IP44 rating allows installation in Zones 1, 2 and 3. Zone 1 is directly above the bath or shower tray, Zone 2 is within 60cm of a water source, and Zone 3 is beyond 60cm. It cannot be installed in Zone 0, which is inside the shower tray or bath itself.

Is the light dimmable?

No. The integrated LED is not compatible with dimmer switches. Connecting this fitting to a dimmed circuit may cause flickering or failure to light.

What colour is 4000K cool white?

4000K sits between warm white (2700-3000K) and daylight white (5000-6500K). It produces a neutral white light without the yellow cast of warm bulbs or the blue tone of daylight bulbs, making it suitable for task lighting in kitchens and bathrooms where colour accuracy matters.

Can the silver trim be removed or painted?

Yes. The silver trim ring is removable, allowing it to be painted to match the ceiling or replaced with a different finish without needing to rewire the fitting.