Description
The Lyrica is a 2 light LED table lamp built from a brushed brass metal frame supporting two opal acrylic spheres, each housing an integrated 3W LED at 3000K. The vertical brass stem rises from a circular 150mm base, with the two spheres mounted on short arms that extend at different heights along the upright. The combined 6W output provides ambient bedside or desk lighting rather than focused task illumination.
Designed for bedside tables, small desks and console surfaces where a compact footprint matters, the Lyrica's 150mm square profile fits surfaces as small as typical nightstands without overhang. The opal acrylic diffuses the LED output evenly, softening the light and reducing glare when the lamp sits at eye level during bedside reading or seated desk work. A switch integrated into the 1.09m cable allows the lamp to be turned on and off without reaching behind furniture or unplugging from the socket.
The brushed finish on the brass frame reduces reflections compared to polished brass and suits both warm-toned traditional interiors and contemporary schemes that pair brass with greys or whites. The metal construction gives the lamp a 1.2kg weight that keeps it stable on surfaces with light contact. The IP20 rating limits use to dry indoor locations only, so the lamp is not suitable for bathrooms or outdoor covered areas.
The integrated LED driver is built into the lamp base and runs directly from 230V mains via a standard UK plug. The LEDs are non-replaceable, so when they reach end of life the entire lamp unit will need replacing. Typical LED lifespan at 3000K is 20,000-30,000 hours, equivalent to approximately 10 years of 8-hour daily use.
Specification
| Length (mm) |
150 |
| Projection (mm) |
150 |
| Cable Length (mm) |
1090 |
| Dimmable |
No |
| Number Of Bulbs |
2 |
| Colour Temperature |
3000K |
| IP Rating |
IP20 |
| Warranty |
5 Years |
Frequently Asked
Is the Lyrica dimmable?
No. The integrated LED driver does not support dimmer compatibility, so the lamp operates at full 6W output when switched on.
Can the LED bulbs be replaced?
No. The LEDs are integrated into the lamp assembly and are not user-replaceable. When the LEDs reach end of life, the entire lamp unit will need replacing. Typical LED lifespan is 20,000-30,000 hours.
What surface size does it need?
The circular base is 150mm in diameter, so the lamp fits comfortably on bedside tables, small desks and console surfaces with a minimum 200mm width to allow clearance around the base.
Is it suitable for bathrooms?
No. The IP20 rating means the lamp is designed for dry indoor use only and is not protected against moisture. It should not be used in bathrooms, kitchens near sinks, or outdoor covered areas.