Floren 4 Light LED Semi-Flush Ceiling Light - Chrome

The Floren is a 4-light LED semi-flush ceiling light built around four clear glass cylinders extending from a polished chrome central mount. Each cylinder houses cascading strands of clear faceted crystal droplets that hang inside the glass, creating a curtain effect when the integrated LEDs illuminate from above. The combined diameter of 48cm and a drop of 22cm from the ceiling give the fitting presence without requiring the clearance of a full pendant.

Designed for rooms with ceiling heights between 2.4m and 2.7m where a chandelier would hang too low, the Floren suits living rooms, dining areas, main bedrooms and hallway landings. The semi-flush format keeps the fitting close to the ceiling while the four arms extend outward in a balanced arrangement, distributing light across a wider area than a single central shade. The 6W LED modules inside each glass cylinder provide ambient lighting rather than task-level brightness, making this a decorative fitting first and a functional source second.

The polished chrome frame reflects light back through the crystal droplets, amplifying the sparkle effect when the fitting is switched on. Each glass cylinder acts as both a shade and a display case for the crystal strands, protecting them from dust while keeping them visible. At 4.5kg the fitting requires secure fixing to a ceiling joist or a support bar rated for the weight. The chrome finish pairs with cool-toned interiors, contemporary schemes and monochrome palettes where reflective metallic accents are used alongside glass and mirror.

Is the LED integrated or replaceable?

The LED modules are integrated into the fitting. They are not user-replaceable bulbs. The 6W rating per light suggests a combined output of approximately 24W across all four arms, which is typical for decorative ambient lighting rather than high-output task lighting.

What ceiling height does it suit?

The 22cm drop from ceiling to base suits rooms with ceiling heights between 2.4m and 2.7m. In lower ceilings the fitting still works as a semi-flush, sitting close enough to avoid head clearance issues. In higher ceilings the proportions may look compressed unless the room is already furnished with low-profile furniture.

How is the crystal cleaned?

The crystal droplets sit inside the glass cylinders, so surface dust accumulates more slowly than on exposed chandelier strands. To clean, switch off at the mains, allow the fitting to cool, and wipe the outer glass cylinders with a damp microfibre cloth. For the crystal inside, remove the glass shades if the design allows and wipe each droplet individually with a soft dry cloth.

What fixing is needed for the 4.5kg weight?

The fitting must be secured to a ceiling joist or a support bar rated for at least 5kg. Standard plasterboard fixings are not adequate for this weight. If the existing ceiling rose is not mounted to a joist, install a metal support bar between joists before fitting the light.