TIBERI PRO 20W Surface LED Downlight 115 deg Mains (940B) Ø170 Cool White - Black

The TIBERI PRO (940B) is a round surface-mounted LED downlight that runs straight off mains supply at 220-240V AC, drawing 20W to deliver 2200 lumens. Its fixed 4000K cool white output sits between warm and daylight tones, giving a clean, neutral light that keeps colours true at Ra 90. The wide 115 deg beam angle spreads light broadly rather than spotting a single point, so a single fitting washes a useful area below it. North American buyers will recognise this format as a surface can light, mounted onto the ceiling rather than recessed into it.

Because it surface-mounts, this downlight suits ceilings where there is no void to recess into, such as concrete soffits, garages or boarded-out rooms. The wide spread and 2200 lumen output cover around 7 m² at general lighting levels, which makes it a practical choice for a small kitchen, utility, hallway or landing where even, glare-controlled light matters. Its IP54 rating means it copes with splashes and humidity, so it also works in covered porches, carports and sheltered bathroom zones. Keep it clear of fully exposed positions, direct water jets or anywhere it could be submerged, as that exceeds what the rating allows.

Built from aluminium alloy with a black finish, the body measures Ø170 x 113mm and weighs 1.09kg, so it presents a compact, solid profile on the ceiling. The integrated LED is driven internally and runs direct from mains, with no separate transformer to specify; it is not dimmable, so it is best paired with a standard on/off switch. Rated for 50,000 hours, the round head fixes to the ceiling surface through its mounting points. The TIBERI PRO line includes other wattages and beam options if you need to match fittings across a space.

Is this downlight dimmable?

No, the TIBERI PRO (940B) is not dimmable, so it should be wired to a standard on/off switch rather than a dimmer. Pairing it with a dimmer can cause flicker or shorten the life of the fitting. It runs directly from a 220-240V AC mains supply.

Does it need a recessed cut-out, or does it surface-mount?

This is a surface-mounted fitting, so it fixes directly onto the ceiling face and does not need a recessed cut-out hole. That makes it ideal for solid concrete soffits or ceilings without a void above. The round body measures Ø170 x 113mm, so allow that clearance below the ceiling line.

Can I use it in a bathroom or covered outdoor area?

Yes, its IP54 rating means it resists splashes and moisture, so it suits sheltered bathroom zones and covered outdoor spots such as a porch or carport. It should not be fitted in fully exposed positions, under direct water jets or anywhere it could be submerged. For those locations a higher IP rating is needed.

How do I clean the fitting?

Switch off the power and let the fitting cool, then wipe the black aluminium body and lens with a soft, dry or slightly damp cloth. Avoid abrasive pads or solvent cleaners, which can mark the finish. Regular dusting helps keep the 2200 lumen output at full brightness.