STATO HI LED 50W Floodlight IP65 - Black

The STATO HI LED is a 50W outdoor LED floodlight that pushes out 6000 lumens of neutral white 4000K light across a wide 120 degree beam. At 120 lm/W it draws a fraction of the power of the old halogen units it stands in for, and the broad spread washes a large area with even, glare-controlled light rather than a tight spot. Buyers shopping the US market will recognise it as an LED flood or security flood light, the wide-throw fixture used to cover yards, forecourts and loading areas.

Its 6000 lumen output and 120 degree beam suit driveways, side returns, car parks, yard entrances and the gable end of a workshop or warehouse, throwing usable light well across the area below rather than concentrating it in one place. As a guide on replacement, an old halogen floodlight runs at roughly 20 lumens per watt, so this fitting covers what a 300W halogen lamp would have done while using 50W. Mount it high on a wall or pole and angle it down to light the working zone; the wide beam favours general area cover over long-distance throw. The neutral 4000K tone keeps surfaces and signage clear without the yellow cast of older lamps.

The body is aluminium alloy in a black finish, rated IP65 so it stands up to rain and wind-driven water in fully exposed positions, with an IK07 impact rating for knocks. It weighs 1.54 kg and is built to run direct from 220 to 240V AC mains, so no separate transformer is needed. This is a non-dimmable fixture with a rated life of around 25,000 hours. It is part of the wider STATO HI LED range, which spans several wattage and output options for matching larger sites.

How bright is the STATO HI LED and how many lumens does it give?

It produces 6000 lumens from 50W, at an efficiency of 120 lumens per watt. The light is a neutral white 4000K, which keeps colours and surfaces looking natural across the lit area.

What halogen wattage does this 50W LED floodlight replace?

An older halogen floodlight runs at around 20 lumens per watt, so 6000 lumens is roughly equivalent to a 300W halogen unit. You get the same coverage for 50W, which cuts running costs sharply over the fitting's life.

Can the STATO HI LED be used outdoors in exposed weather?

Yes. It carries an IP65 rating, so it is fully weatherproof against rain and wind-driven water in open outdoor positions. The IK07 rating also gives it a degree of impact resistance for exposed sites.

How should the floodlight be cleaned and maintained?

Switch it off and let it cool, then wipe the front glass and aluminium body with a soft damp cloth to clear dust and grime that can dull the output. Avoid harsh solvents or high-pressure jets aimed directly at the seals. A clean lens keeps the full 6000 lumens reaching the area below.