Description
The Selia is a 141cm linear island suspension light with nine E14 bulb fittings set beneath a laser-cut polished chrome crown and surrounded by cascading tiers of cut crystal prisms. The chrome top section features geometric staggered panels that cast shadow patterns onto the ceiling when lit, while the vertical crystal elements below diffuse and multiply the light across the room. The entire assembly hangs from dual suspension cables fixed to a polished chrome bar canopy.
Designed for kitchen islands, dining tables and long open-plan zones, the Selia's 141cm length suits surfaces between 180-240cm long, positioned approximately 70-85cm above the worktop or table depending on ceiling height. The 40cm projection from canopy to lowest crystal tier requires ceiling heights of at least 2.6m to maintain comfortable head clearance. The dual cable suspension distributes the 30kg weight across two ceiling fixing points, typically spaced 120-130cm apart.
Each of the nine E14 bulb positions sits within the crystal structure, with the light passing through the prisms and refracting into multiple beams. The laser-cut chrome panels above the crystal tiers are angled in different directions, creating geometric fragmentation of the ceiling reflection when the bulbs are lit. The polished chrome finish provides high reflectivity that amplifies both the crystal refraction below and the geometric shadow play above.
The fixture pairs with high-gloss kitchens, marble or glass dining tables, and minimal contemporary interiors where the chrome and crystal contrast with matt walls or dark joinery. The 30kg weight and dual-cable suspension mean professional installation is required, with structural ceiling supports verified before fitting.
Specification
| Finish |
Chrome |
| Diameter |
141cm |
| Height |
75cm |
| Projection |
40cm |
| Number of Lights |
9 |
| Bulb Type |
E14 |
| Weight |
30KG |
Frequently Asked
What bulbs does the Selia take?
The fitting takes nine E14 small Edison screw bulbs, sold separately. Most installations use warm-white LED candle bulbs between 4-6W and 2700K-3000K to balance light output with the crystal refraction. Clear filament bulbs create more defined prismatic effects; frosted bulbs give softer diffusion.
What ceiling height is needed?
The 75cm drop from canopy to lowest crystal point requires ceiling heights of at least 2.6m to maintain 70-85cm clearance above a kitchen island or dining table. Lower ceilings cannot safely accommodate this fitting without risk of head collision.
How is the 30kg weight supported?
The dual suspension cables distribute the weight across two ceiling fixing points, typically spaced 120-130cm apart along the canopy bar. Both points must be anchored into structural joists or concrete, not just plasterboard. Professional installation is required to verify ceiling load capacity before fitting.
Can the drop height be adjusted?
The suspension cables allow some adjustment on installation to suit different ceiling heights. However, the internal cable run and crystal tier assembly limit how much the drop can be shortened without dismantling the structure. Consult a qualified electrician before attempting adjustment.