Description
The SEIDY (B/M) is a recessed round LED spotlight that takes a low-voltage MR16 bulb on a Gx5.3 base, running at 12V AC or DC and rated for a maximum of 10W. Known to UK buyers as a recessed spotlight or downlight trim, it sits flush in the ceiling and directs a focused MR16 beam downward, so the spread depends on the bulb you fit. The fixed black matt bezel measures Ø92mm with a 26mm depth, giving a compact, low-profile finish once installed.
Because the bulb is not included, the SEIDY lets you pick the MR16 beam angle and colour temperature to suit the job, which makes it useful for accent and task points rather than broad ambient washing. It works well over a kitchen worktop run, picking out artwork or shelving in a living room, or marking out a hallway, with several fittings spaced along a line to build up coverage. Note the IP20 rating: this is a dry indoor fitting only, so keep it clear of bathrooms, porches and any exposed or damp location. It needs a 12V supply, so a transformer or LED driver is required between the mains and the fitting.
The body is aluminium alloy in a black matt finish, weighing 102g, with the round profile keeping the visible trim small against the ceiling. It recesses into the ceiling rather than mounting on the surface, dropping into a cut-out so only the bezel shows. Dimming behaviour follows the MR16 bulb and the 12V driver you choose, so pair a dimmable lamp with a compatible transformer if you want adjustable output. The Seidy range includes matching recessed spotlights in other variants to keep a consistent look across a room.
Specification
| Power |
max 10W |
| Voltage |
12 AC; 12 DC |
| IP rating |
IP20 |
| Mounting |
Recessed Mount In The Ceiling |
| Cap / base |
Gx5.3 |
| Light source |
MR16 |
| Shape |
Round |
| Dimensions |
Ø92 × 26 mm |
| Weight |
102 g |
| Material |
Aluminium Alloy |
| Finish |
Black Matt |
Downloads
Frequently Asked
Does this spotlight come with an MR16 bulb?
No, the bulb is supplied separately. The SEIDY takes a 12V MR16 lamp on a Gx5.3 base rated up to 10W, which lets you choose the beam angle and colour temperature that suits the space.
Can I use this fitting in a bathroom or outdoors?
No. It is rated IP20, which means it is for dry indoor use only. Keep it out of bathrooms, shower zones, porches and any damp or exposed location, and choose an IP65 fitting for those areas instead.
What beam angle does it give?
The beam is set by the MR16 bulb you fit rather than the housing, so you can select a tighter beam for accent points or a wider one for general task lighting. This makes it flexible for picking out worktops, shelving or artwork.
How do I clean the spotlight?
Switch off the supply and let the fitting cool, then wipe the black matt aluminium bezel with a soft dry or slightly damp cloth. Avoid abrasive cleaners so the matt finish stays even, and do not let moisture reach the bulb or contacts.