LED Rope Light 50m 100W IP65 Weatherproof - Red

This LED rope light is a round, flexible encased tube that throws a continuous line of red light along its full 50m run. Often searched for as led rope light or simply rope light, in the US it sits alongside the broader led strip lights family as a sealed decorative cord rather than a bare cut-to-length tape. It draws 100W in total across the length and gives 300 lm, fed through its own controller and connection kit rather than being cut to size like an open strip. The 13 mm diameter tube keeps the diodes evenly diffused so the line reads as a smooth glow with no harsh hotspots.

With its IP65 rating the rope handles exposed outdoor and wet locations, so it suits eaves, rooflines, balcony edges, fencing, pergolas and garden borders as well as sheltered indoor runs. Coverage here is about decorative outline and accent rather than lighting a room, so think of it as marking a long edge or perimeter with a continuous red line rather than providing ambient brightness. The 50m length covers a substantial run in one piece, which makes it practical for wrapping a large patio, tracing a long boundary or outlining a feature where shorter strips would need joining.

The tube is sealed along its whole length to keep moisture and dust out, which is what gives it the IP65 weatherproof rating and a rated life of around 15,000 hours. It runs on 210V DC and is supplied to be powered through its matching controller and connection kit, so it is fed from that supply rather than wired straight to a socket. The fixed red output means there is no colour switching to set up, and the flexible build lets it bend around corners and curves to follow the shape of whatever it outlines.

Product Specification Sheet

Range Datasheet

Is this rope light suitable for outdoor use?

Yes. It is rated IP65, which means it is weatherproof and suitable for exposed outdoor and wet locations such as eaves, fencing and garden borders. It can also be used indoors for decorative runs.

Can the rope light be cut to length?

Unlike a bare LED tape, this is a sealed rope supplied as a complete 50m run and is fed through its own controller and connection kit. It is designed to be installed at its set length rather than cut along the tube, so plan the run to suit the 50m piece.

How do I power the rope light?

It runs on a 210V DC supply through its matching controller and connection kit rather than plugging straight into a wall socket. Use the supplied connection method so the full 50m length is driven correctly.

How do I clean and maintain it?

Wipe the sealed tube down with a soft, slightly damp cloth once it is switched off and cool, then dry it before use. The IP65 sealing keeps moisture out, so an occasional wipe to clear dust and grime is all it needs over its rated 15,000-hour life.