Description
This LED rope light is a round, flexible encased tube that runs to a full 50m length, drawing 100W across the run and giving a blue glow along its whole length. The 13mm diameter cord bends easily around corners and curves, so it suits continuous decorative outlines rather than spot or task lighting. Often sold in the US as a led rope light, it is fed through its own controller and connection kit and is not cut like a bare led tape, which keeps the sealed tube weatherproof end to end.
Rope light of this kind earns its place along eaves, fascias, balcony edges, railings, pergolas and around doorways or window reveals, picking out the line of a structure after dark. Because it is a decorative outlining product rather than ambient room lighting, the point is the run it traces and the colour it casts, not a floor coverage figure. The 50m length gives plenty of cable to wrap a sizeable garden feature, a long boundary or a marquee perimeter, and the blue tone works well for seasonal and event displays where a coloured accent is wanted rather than white illumination.
The tube is sealed to IP65, so it copes with exposed outdoor and wet locations, including direct rain and damp eaves. It runs on 210V DC and is powered through its supplied controller and connection kit rather than being joined or trimmed by hand, which protects the weatherproof seal. The product is rated to around 15,000 hours and weighs 7.5kg over the full 50m reel. Wipe the tube clean with a damp cloth when it dulls, keeping the power off until it is fully dry. Connectors and end caps for this rope light range are available alongside it.
Specification
| Power |
100 W |
| Luminous flux |
475 lm |
| Voltage |
210V DC |
| IP rating |
IP65 |
| Colour |
Blue |
| Length |
50 m |
| Diameter |
Ø13 mm |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Can this rope light be used outdoors in the rain?
Yes. The sealed tube is rated IP65, which makes it weatherproof and suitable for exposed outdoor and wet locations such as eaves, railings and garden features. It copes with direct rain, so it can be left in place through the seasons.
Does it need a driver or controller to run?
Yes. It runs on 210V DC and is fed through its supplied controller and connection kit rather than plugged straight into a wall socket. Use the matching connection kit so the sealed, weatherproof tube stays intact along the full run.
Can the rope light be cut to length?
Unlike a bare LED strip, this is an encased rope light supplied as a 50m run and fed via its controller and connection kit, so it is not cut by hand. Keeping the tube uncut preserves the IP65 seal and the weatherproof rating.
How should the rope light be cleaned?
Switch off the power and wait until the tube is fully dry before cleaning. Wipe the 13mm tube with a soft, damp cloth to clear dust and grime, then leave it to dry before powering it back on. Avoid harsh solvents that could mark the casing.