Description
This LED rope light is a round, flexible encased tube that gives a continuous line of red light across a full 30m run. Known in the US as led rope light or light strip, it draws 60W in total and is designed for outline and accent work rather than task brightness. The fitting runs at 210V DC and is fed through its own controller and connection kit, so it is not cut to length like a bare reel strip. At 13mm in diameter, the tube bends easily around corners, edges and curved surfaces to follow the shape of a building or feature.
Its weatherproof IP65 rating makes it suited to exposed outdoor positions and wet locations, so it can be run along eaves, gutter lines, balustrades, fences, pergolas and garden borders. The light it gives is a marker and decorative glow rather than ambient room lighting, throwing a clear red outline that reads well after dark along the length it traces. A single 30m run covers a long roofline, a patio perimeter or a marquee edge in one continuous sweep, and the colour holds evenly from end to end.
Built around a flexible encased body finished in red, the rope light carries an IP65 seal against rain and dust and is rated for around 15,000 hours of use. It weighs 4.46kg over the full length and is fed from its connection kit rather than wired direct, keeping installation tidy along straight or curved routes. The encased tube can be clipped or held in place along eaves and edges. This red 30m option sits within a wider rope light range offered in further lengths and colours.
Specification
| Power |
60 W |
| Luminous flux |
180 lm |
| Voltage |
210V DC |
| IP rating |
IP65 |
| Colour |
Red |
| Length |
30 m |
| Diameter |
Ø13 mm |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Is this rope light suitable for outdoor use?
Yes. It carries an IP65 rating, which means it is weatherproof and stands up to rain and dust in exposed outdoor positions. It is well suited to eaves, fences, patios and garden borders.
Can the rope light be cut to length?
No. Unlike a bare LED strip, this rope light is supplied as a sealed 30m tube and is fed through its own controller and connection kit. It is run at its set length rather than cut at intervals.
What voltage does it run at?
The rope light runs at 210V DC and is powered through its supplied connection kit rather than being wired straight to a wall socket. Use the matching feed so the run is driven correctly across the full length.
How long does it last and how do I keep it clean?
It is rated for around 15,000 hours of use. Wipe the tube with a soft, slightly damp cloth when switched off and dry, taking care around the connection points, and avoid harsh solvents on the encased body.