LED Rope Light 30m 60W IP65 Outdoor Cool White

This LED rope light is a round, flexible encased tube that throws an even line of cool white light along its full 30 metre length. Drawing 60W in total for around 3600 lumens, it gives a steady, continuous glow rather than a spotlit beam, which suits outlines and edge runs. In US terms this is the familiar rope light format, a sealed tube fed through its own connection kit rather than a bare strip that you cut to length. The fixed cool white tone keeps the run crisp and consistent across the whole reel.

Its strength is decorative and architectural marking rather than ambient room lighting, so think of it as a tool for tracing shapes and edges. It works well picking out eaves, balustrades, steps, pergolas, fascias and the lines of a patio or garden feature, where the soft continuous line reads clearly after dark. Across a long 30 metre run it can outline a large structure or wrap a sizeable terrace, and because the light is diffused along the tube there are no harsh hot spots. Coverage is best judged by the length you need to follow rather than by floor area, so measure the edge or outline you want to trace.

The tube is sealed to IP65, so it is genuinely weatherproof and stands up to exposed outdoor and wet locations as well as sheltered runs. It measures 13 mm in diameter and weighs 4.46 kg across the full 30 metres, and it runs at 210V DC fed through its controller and connection kit rather than being cut at intervals like a flexible reel strip. With a rated 15,000 hour lifespan and Ra 80 colour rendering, it is built for long decorative service. Our wider strip and rope range includes the connection and supply parts you will need to power and position the run.

Product Specification Sheet

Range Datasheet

Is this rope light suitable for outdoor use?

Yes. It is rated IP65, so the sealed tube is weatherproof and copes with exposed outdoor and wet locations. That makes it suitable for eaves, fascias, pergolas and patio edges as well as covered areas.

Can I cut this rope light to length?

It is a sealed encased tube fed through its own controller and connection kit, so it is not cut like a bare flexible strip. The 30 metre length is supplied as a continuous run and connected at its end fittings rather than trimmed at intervals.

Does it need a separate driver or controller?

Yes. It runs at 210V DC and is powered through its controller and connection kit rather than plugging straight into a standard wall socket. You should pair it with the matching supply and connection parts for the run.

How do I clean the rope light?

Wipe the sealed tube with a soft, damp cloth and let it dry before use. Avoid harsh solvents or abrasives that could mark the casing, and there is no need to dismantle the run to clean it.