LED Rope Light 30m 60W Daylight IP65 - Outdoor

This LED rope light is a round, flexible encased tube that carries a continuous run of diodes along its 30m length, giving an even line of light for outlines, eaves and decorative runs. Sold as one of the more common forms of led strip lights, in US terms it sits alongside led tape and rope light products used to trace edges and create soft glowing borders. It draws 60W in total and puts out 3600 lumens across the full reel in a 6500K daylight tone, with a CRI of Ra 80 for clean, natural-looking colour. The 13mm tube is fed through its connection kit rather than cut like a bare strip, so it installs as a single continuous length.

Because the light spreads along the whole run rather than from a single point, this rope is best judged on the line it draws rather than a floor area. It works well tracing the eaves of a building, outlining a pergola or balcony, marking the edge of a patio or running along railings and steps. At 30m it covers a long perimeter in one piece, throwing a steady daylight line that reads clearly after dark without flooding the space. The daylight tone suits crisp, modern outlines and commercial frontages where a cooler, brighter edge is wanted rather than a warm decorative glow.

Built into a weatherproof IP65 tube, the rope is rated for exposed outdoor and wet locations, so it copes with rain and damp eaves. It runs on 210V DC and is fed through its own controller and connection kit, which means it is powered as a complete run rather than wired direct to a mains socket like a standard fitting. The encased polycarbonate-style tube measures Ø13mm, the full assembly weighs 4.46kg and the diodes are rated for around 15,000 hours. The integrated LEDs are not separately replaceable, so the rope is fitted and run as a sealed length.

Product Specification Sheet

Range Datasheet

Can this rope light be used outdoors?

Yes. It carries an IP65 rating, so it is weatherproof and suitable for exposed outdoor and wet locations such as eaves, pergolas and patio edges. It copes with rain and damp conditions outside.

Does it need a driver or controller to run?

Yes. It runs on 210V DC and is fed through its own controller and connection kit rather than plugged straight into a wall socket. It should be powered as a complete run using the supplied connection arrangement, not wired direct to the mains like a standard fitting.

Can the rope be cut to length?

Unlike a bare strip, this rope light is supplied and run as a single 30m encased tube fed through its connection kit. It is designed to be installed as a continuous length rather than cut down, so plan the run to suit the perimeter you want to trace.

How do I clean the rope light?

Wipe the tube down with a soft, damp cloth and let it dry before powering it back on. Avoid harsh solvents on the polycarbonate-style casing, and clear away leaves or grime from along the run so the daylight line stays even and bright.