LED Rope Light 15m 30W IP65 Outdoor - Cool White

This LED rope light is a round, flexible encased tube that carries a continuous run of diodes inside a clear weatherproof sleeve, here over a 15m length drawing 30W and giving 1800 lumens in a crisp cool white. At 13mm in diameter it bends easily around corners and curves, so the line of light follows whatever edge it traces. American buyers shopping for an outdoor rope light or a weatherproof LED tape light will recognise this format, which runs from its own controller and connection kit rather than being cut at intervals like a bare reel.

Decorative and architectural runs are where a rope light of this length earns its place: outlining eaves, soffits, balustrades, steps and pergolas, or marking the line of a path or patio edge after dark. The 15m run is long enough to trace the full perimeter of a porch roof or a sizeable deck in a single length, and the even spread of light reads as a continuous glowing line rather than visible dots. Coverage here is about outline and accent rather than flooding a space, so think of it as drawing the shape of a feature in cool white light rather than lighting a room to a set brightness.

The encased tube is sealed to IP65, which means it copes with rain and exposed outdoor positions as well as damp sheltered spots. It runs at 210V DC and is fed through its supplied controller and connection arrangement, so it is wired and energised as a complete run rather than spliced into mains directly. With a CRI of Ra 80 the cool white output stays clean against pale render, brick or timber, and the 13mm profile sits discreetly along an edge. Rated for 15,000 hours and weighing 2.21kg over the full length, it suits permanent decorative installs. Other lengths and strip formats are available across the range from us.

Product Specification Sheet

Range Datasheet

Can this rope light be used outdoors?

Yes. It is sealed to IP65, so it is suitable for exposed outdoor positions and wet or damp locations such as eaves, porches, patios and garden runs. The encased tube keeps water out while the light stays in place permanently.

Does it need a separate driver or controller?

Yes. This rope light runs at 210V DC and is fed through its supplied controller and connection kit rather than plugging straight into a wall socket. It is energised as a complete run, so follow the connection arrangement provided when installing it.

Can the rope light be cut to length?

Unlike a bare LED strip on a reel, this is a sealed round tube fed from its connection kit, so it is supplied and run as a 15m length rather than cut at marked intervals. Plan the run to suit the edge or feature you are outlining before fixing it in place.

How do I clean and maintain it?

Wipe the encased tube with a soft, damp cloth when it is switched off and cool, then dry it before powering back on. The sealed IP65 sleeve resists dirt and moisture, so an occasional wipe is usually all it needs to keep the cool white output looking clean.