Description
This is a recessed square downlight that drops into a 77mm ceiling cut-out, sitting flush against the ceiling face once installed. It takes a single GU10 twist-lock lamp, rated for up to 10W, which makes it a straightforward fit for standard mains GU10 spotlight bulbs. The bulb is not included, so the output and tone are set by whichever GU10 lamp you choose. The fixed position holds the lamp pointing straight down, giving a clean, even spread across the area below.
From the Glozo range, the housing measures 92 × 92 mm with a low 25 mm depth, so it suits ceilings with limited recess space behind the plasterboard. The compact square trim works in kitchens, hallways and living spaces where a tidy, repeated grid of downlights is wanted, and the small footprint lets several sit in a run without crowding the ceiling. As an IP20 fitting it is intended for dry indoor rooms only, so keep it away from bathroom zones and any sheltered outdoor position.
The body is aluminium alloy, finished in a choice of black or white to match the ceiling or pick out the trim against it. The fixed, non-tilt construction keeps installation simple: cut the 77mm hole, wire in and clip the housing into place. The GU10 connector accepts any compatible mains twist-lock lamp, and whether the fitting dims depends entirely on the bulb you pair with it rather than the housing itself.
Specification
| Fitting type |
Recessed downlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Fixed |
| Cut-out |
77mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy |
| Colour / finish |
Black/White |
| Dimensions |
92 × 92 × 25 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included?
No, this downlight is supplied without a bulb. It accepts a single GU10 twist-lock lamp, which you choose and buy separately, so you can set the brightness and colour tone to suit the room.
What size hole do I need to cut?
The fitting needs a 77mm cut-out in the ceiling. The square trim itself measures 92 × 92 mm, so it covers the hole neatly, and the shallow 25 mm depth suits ceilings with limited space behind the board.
Can I use this in a bathroom or outdoors?
No, this is an IP20 fitting rated for dry indoor use only. Keep it clear of bathroom shower and bath zones and any outdoor or sheltered exterior position, where a higher IP rating is required.
Can the downlight be angled or tilted?
No, this is a fixed-position downlight, so the lamp points straight down and cannot be tilted. If you need to aim the light, an adjustable spotlight fitting would be the better choice.
Downloads
Product Specification Sheet
Range Datasheet