Description
This is a recessed adjustable spotlight that accepts a single GU10 twist-lock lamp, supplied without a bulb so you can choose the output and tone to suit the room. The square trim sits flush in the ceiling and the inner section tilts up to 30 degrees, letting you angle the chosen lamp toward a feature wall, artwork or a defined zone rather than straight down. It takes a GU10 lamp rated up to 10W maximum.
The square format suits kitchens, hallways, living rooms and home offices where directional accent light is wanted alongside general lighting. Because the head tilts, a row of these can wash a wall, pick out shelving or aim across a worktop, with each fitting set independently. It drops into an 85mm cut-out and works well in standard plasterboard ceilings at typical domestic heights. The white finish keeps the trim discreet against a painted ceiling.
The housing is built from aluminium alloy and steel in a white finish, measuring 98 by 98 by 50mm with a shallow 50mm depth behind the ceiling line. It is rated IP20 for dry indoor use only, so keep it out of bathrooms and any damp or exposed location. The GU10 lamp is not included; fit your preferred GU10 bulb up to 10W, and whether the spotlight dims will depend on the lamp you choose. This fitting belongs to the Laven range of recessed spotlights.
Specification
| Fitting type |
Adjustable spotlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Tiltable, 30° |
| Cut-out |
85mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Aluminium Alloy, Steel |
| Colour / finish |
White |
| Dimensions |
98 × 98 × 50 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included?
No, this fitting is supplied without a bulb. It accepts a single GU10 twist-lock lamp rated up to 10W maximum, which you buy separately so you can pick the brightness and tone you want.
How far does it tilt and what can I aim it at?
The inner head tilts up to 30 degrees from vertical, so you can angle the chosen lamp toward a wall, artwork, shelving or a particular zone. Each fitting is adjusted independently, which makes it easy to set up an accent or wall-wash effect.
What size cut-out does it need?
It is a recessed fitting that drops into an 85mm cut-out. The trim measures 98 by 98mm square with a 50mm depth behind the ceiling, so allow clearance in the void above.
Can I use it outdoors or in a bathroom?
No. It is rated IP20 for dry indoor use only, so it should be kept clear of bathrooms, porches and any damp or exposed position.
Downloads
Product Specification Sheet
Range Datasheet