Description
This is a recessed adjustable spotlight that accepts a single GU10 twist-lock lamp, supplied without a bulb so you can choose the output and tone to suit the room. The head tilts through 30 degrees, letting you direct the beam off the vertical to aim it at a feature rather than straight down. The round bezel sits flush in the ceiling on a 75mm cut-out, with a compact Ø95 mm face and a 24 mm depth that keeps the housing tight to the ceiling void.
Because the head angles, it works well where the light needs to fall on something specific: grazing a textured wall, picking out a framed picture or a shelf, or washing a defined zone in a kitchen or hallway. Group several across a ceiling and aim each one separately to layer the light across a space. The fitting carries an IP20 rating, so it is for dry interior locations only and should be kept clear of bathroom zones and any exposed outdoor positions.
The fitting is finished in black with a glass detail, giving a clean recessed face that suits the Glozo range. It takes a GU10 lamp rated up to 10W, which twists into the holder behind the bezel, and the tilt mechanism holds the chosen angle once set. Whether the fitting can be dimmed depends on the bulb you fit, as the housing itself sets no dimming behaviour. Please note the lamp is not included.
Specification
| Fitting type |
Adjustable spotlight |
| Bulb cap (lamp not included) |
GU10 twist-lock |
| Adjustment |
Tiltable, 30° |
| Cut-out |
75mm cut-out |
| Max lamp wattage |
max 10W |
| IP rating |
IP20 |
| Material |
Glass |
| Colour / finish |
Black |
| Dimensions |
Ø95 × 24 mm |
| Lamp included |
No, supplied without a bulb |
Frequently Asked
Is a bulb included with this spotlight?
No, the fitting is supplied without a lamp. It accepts a GU10 twist-lock bulb rated up to 10W, which you buy separately so you can pick the brightness and colour tone you prefer.
How far does the head tilt?
The head tilts through 30 degrees off vertical, so you can angle the beam to aim it at a wall, a picture or a specific zone rather than only pointing straight down. The angle holds once set.
What size cut-out does it need?
It recesses into a 75mm cut-out, with a Ø95 mm round face and a shallow 24 mm depth behind the ceiling. Check there is enough clearance in the ceiling void before fitting.
Can I use this fitting outdoors or in a bathroom?
No. It is rated IP20, which means it is for dry indoor use only. Keep it clear of bathroom zones, sheltered porches and any exposed outdoor position.
Downloads
Product Specification Sheet
Range Datasheet