LumiLife 150W LED Floodlight 18000lm 5000K - Black IP65

The LumiLife 150W LED floodlight delivers 18,000 lumens at 5000K daylight white through a 110° beam angle, housed in a die-cast aluminium body with a toughened glass diffuser and IP65 rating against water ingress and dust. The integrated LED array sits behind the glass panel on a flat mounting bracket that adjusts through approximately 180° vertical tilt, allowing light to be directed at ground level or onto building facades depending on mounting height.

Designed for commercial car parks, building perimeters, construction site lighting, sports courts and large domestic gardens, the floodlight replaces 400-500W metal halide or halogen equivalents with a 50,000-hour rated lifespan under typical outdoor conditions. The 110° beam width suits area lighting rather than long-throw applications — at a typical 4-6m mounting height the light covers an area approximately 8-10m wide. The non-dimmable driver operates on 230V mains and the rear cable entry gland accepts standard 3-core outdoor-rated flex.

The die-cast aluminium housing provides structural rigidity and acts as a heat sink to dissipate the operating temperature of the LED array, extending lifespan in high-ambient conditions. The black powder-coat finish resists UV degradation and corrosion in coastal and industrial environments. At 18,000 lumens the light output suits spaces requiring high-visibility security lighting, working areas that need task illumination after dark, or event spaces needing functional wash lighting across large ground areas.

What does the IP65 rating mean for outdoor use?

IP65 rates the floodlight as protected against dust ingress and low-pressure water jets from any direction. This means the fitting can be mounted outdoors in rain, but should not be submerged or subjected to high-pressure cleaning equipment directly at the housing joints.

What mounting height is recommended?

The 110° beam angle and 18,000 lumen output suit mounting heights between 4-6m for area lighting. At 4m the light covers approximately 8m width; at 6m it covers approximately 10m width. Lower mounting increases brightness at ground level but reduces coverage area.

Can it replace a 400W metal halide floodlight?

Yes. The 150W LED delivers comparable light output to a 400-500W metal halide fitting while consuming significantly less power. The 5000K colour temperature is cooler than typical metal halide, providing clearer visibility for security and task applications.

Is the floodlight suitable for bathroom zones?

The IP65 rating allows use in bathroom Zones 1, 2 and 3, but not Zone 0 (inside a bath or shower enclosure). In practice, the 150W output and industrial housing make it impractical for residential bathroom use — it is designed for outdoor and commercial applications.