Description
The Thea wall light brings together a satin nickel finish, alabaster effect glasses and a faceted crystal drop. It is a two light bracket, with the two glasses spaced across a curved arm and the crystal catching the light below. The alabaster glasses give a soft, warm glow rather than a hard beam, and the satin nickel finish sits quietly against most wall colours. The glasses are included in the price. Lamps are not supplied, so you will need to add these separately.
The fitting measures 340mm wide and 200mm high, with a projection of 170mm from the wall, so it holds close without crowding a hallway or landing. It takes two E14 lamps, with a maximum of 10W per lamp and 20W across the fitting. Output is rated at 940 lumens at a warm 2700K colour temperature. The light is dimmable, so you can set the level to suit the room, using a compatible dimmer and dimmable lamps. There is a switch on the backplate, which is handy where you do not have a wall switch nearby. It is IP20 rated and Class 2, suitable for interior use only, and it weighs 2kg.
This wall light suits a hallway, landing, living room or bedroom, working well in pairs either side of a bed, a fireplace or a mirror. The warm glow and the crystal drop make it a good fit where you want a little sparkle without a heavy look. You can order it from us online with free UK and worldwide delivery on orders over £99. If you would like help choosing lamps or a compatible dimmer, our team is happy to advise before you buy, so you have everything ready when the fitting arrives.
Specification
| Height |
200mm |
| Width |
340mm |
| Projection |
170mm |
| Number of Lamps |
2 |
| Lamp Cap |
E14 |
| Maximum Wattage per Lamp |
10W |
| Maximum Fitting Wattage |
20W |
| Lumens |
940lm |
| Colour Temperature |
2700K |
| IP Rating |
IP20 |
| Electrical Class |
Class 2 |
| Dimmable |
Yes |
| Lamps Supplied |
No |
| Suitable For |
Interior |
| Weight |
2.00KG |
Frequently Asked
Are the glasses included?
Yes, the alabaster effect glasses and the faceted crystal drop are included in the price. Only the lamps are supplied separately.
Which lamps do I need?
It takes two E14 lamps, up to 10W each and 20W in total. Lamps are not supplied, so please add these to your order.
Can it be dimmed?
Yes, it is dimmable. You will need a compatible dimmer switch and dimmable lamps to control the level.
What are the dimensions?
It is 340mm wide and 200mm high, with a projection of 170mm from the wall. It weighs 2kg.
Is there a switch on the fitting?
Yes, there is a switch on the backplate, which is useful where you do not have a nearby wall switch.
Can I use it in a bathroom?
No, it is IP20 rated and suitable for interior use only, so it is not intended for bathrooms or damp areas.