Description
The Eveready 10W LED floodlight pairs a compact 110mm black aluminium housing with an integrated 10W LED chip delivering 1050 lumens of 4000K cool white light across a 120° beam. The IP65 rating seals the housing against water jets and dust ingress, making it suitable for year-round outdoor installation in garden borders, above doorways, onto garage walls and along pathways.
Designed for small-area illumination rather than large façade washing, the floodlight suits domestic and light commercial applications where focused directional light is needed without the output or running cost of a 30-50W flood. The quick-fix bracket allows the housing to tilt through approximately 90° once wall-mounted, letting you aim the beam upwards onto walls, downwards onto pathways, or at a shallow angle across patios and driveways. The 220-240V mains supply connects directly through the rear cable entry, eliminating the need for external transformers.
The black powder-coated aluminium body measures 110mm tall by 90mm deep by 30mm wide, giving a low-profile footprint that sits flat against brickwork, timber cladding and rendered walls without projecting far from the surface. The 1050-lumen output at 4000K produces a neutral cool white tone that renders colours accurately under evening light, making it a practical choice for security lighting, garage entrances and areas where you need to see clearly rather than create ambience. At 10W draw, the running cost is approximately 0.3p per hour on standard UK electricity tariffs.
Specification
| Weight (KG) |
0.24 |
| Width (mm) |
30 |
| Height (mm) |
110 |
| Depth (mm) |
90 |
| Wattage |
10W |
| Lumen |
1050 |
| Energy Rating |
F |
| Kelvin |
4,000K |
| Colour Temperature |
Cool White |
| Dimmable |
No |
| Beam Angle |
120 |
| LED or Halogen |
LED |
| IP Rating |
IP65 |
| Zone |
Suitable for use in Zones 3, 2 and 1 only (not Zone 0) |
Frequently Asked
Can this be used in bathrooms?
The IP65 rating makes it suitable for bathroom Zones 1, 2 and 3 (not Zone 0, which is the interior of baths and shower trays). Zone 1 is directly above a bath or shower to 2.25m height, Zone 2 extends 0.6m horizontally from Zone 1, and Zone 3 is elsewhere in the room beyond these zones.
Is it dimmable?
No. The integrated LED is non-dimmable and runs at full 10W output when switched on.
How is it mounted?
The floodlight comes with a quick-fix bracket that fixes to the wall with two screws (not supplied). The housing then clips or bolts onto the bracket and can be tilted to aim the beam. The mains cable enters through the rear of the housing.
What area does 1050 lumens cover?
At 1050 lumens across a 120° beam, this floodlight comfortably illuminates a 3-4m² patch when mounted 2-3m above ground level. It suits doorways, small patios, garage entrances and pathway sections rather than large driveways or building façades.