Energizer 10W LED PIR Floodlight - 1200lm 6500K Daylight

The Energizer 10W LED PIR floodlight combines a passive infrared motion sensor with an integrated 10W LED producing 1200 lumens at 6500K daylight white. The PIR sensor detects movement within its detection zone and triggers the LED to full brightness automatically, then switches off after a preset duration once movement stops. The 110° beam angle spreads light across a wide arc, covering driveways, side passages and garden access points from a single mounting position.

Designed for wall mounting at heights between 1.8m and 3m, the floodlight suits residential security lighting, trade premises perimeter coverage, and commercial car parks where automatic activation reduces energy waste compared to dusk-to-dawn operation. The IP44 rating protects the internal components from rain and dust ingress, making the unit suitable for exposed outdoor locations in the UK climate. The aluminium housing with a black finish dissipates heat from the LED array efficiently, maintaining light output over the 30,000-hour rated lifespan.

The 6500K colour temperature produces a crisp, cool-white light that improves colour rendering and visibility compared to warmer LEDs, particularly in security and task applications where accurate colour perception matters. The floodlight operates on 230V AC mains and draws 10W at full output, equivalent to approximately 100W from a traditional halogen floodlight. The unit is non-dimmable and the PIR sensor settings are typically adjustable via controls on the rear of the housing for sensitivity and duration.

How is the PIR sensor adjusted?

Most Energizer PIR floodlights have adjustment controls on the rear or underside of the housing for sensitivity (detection range) and duration (how long the light stays on after detecting movement). Consult the packaging or manual for the specific control layout on this model.

What mounting height works best?

PIR floodlights perform best when mounted between 1.8m and 3m above ground level, angled slightly downwards. Mounting too high reduces detection accuracy; mounting too low increases false triggers from small animals or windblown objects.

Can it be left on continuously without the PIR?

This model is designed for PIR-triggered operation. If you need a floodlight that stays on continuously, look for non-PIR models or consider overriding the sensor if the unit allows manual override mode (check the manual).

Is the LED replaceable?

No. The LED is integrated into the floodlight housing and is not user-replaceable. The 30,000-hour lifespan equates to approximately 10 years of typical PIR-triggered use, after which the entire unit is replaced.