Description
The Eclipsea is a 605mm brass bar wall light carrying six frosted glass globes, each housing an E14 bulb fitting. The globes sit at equal intervals along the metal bar, creating a balanced horizontal spread of light across bathroom mirrors, bedroom dressers, and hallway walls. The satin brass finish has a warm, low-sheen tone that pairs well with both neutral and jewel-toned interiors.
Designed primarily as vanity lighting for bathrooms and dressing areas, the Eclipsea also works in hallways needing wider horizontal coverage than a single pendant or downlight can provide. The 605mm length suits mirrors and wall spans between 700-900mm wide, positioned 1600-1800mm from floor level for face-level illumination. The IP20 rating limits the fitting to zones outside splashback areas in bathrooms — it can be used above a mirror but not directly over a sink or bath where direct water contact is possible.
Each globe diffuses light through frosted glass, softening the direct output from the six E14 bulbs (sold separately) and reducing glare in close-up tasks like applying makeup or shaving. The shallow 40mm projection from the wall keeps the fitting tight to the surface, minimising obstruction in narrower hallways and smaller bathrooms. The metal bar and brass finish give the fitting a 1.2kg presence that requires secure wall fixing into masonry or stud locations.
The Eclipsea is dimmable when paired with compatible E14 dimmable bulbs and a suitable dimmer switch, allowing light levels to be adjusted for different times of day. Most users pair this with warm-white LED bulbs at 2700K-3000K for a comfortable, non-clinical bathroom atmosphere.
Specification
| Length (mm) |
605 |
| Projection (mm) |
40 |
| Dimmable |
Yes |
| Number Of Bulbs |
6 |
| Bulb Type |
E14 |
| IP Rating |
IP20 |
| Warranty |
5 Years |
Frequently Asked
What bulbs does it take?
The Eclipsea takes six E14 small Edison screw (SES) bulbs, sold separately. Most users pair this with 4-6W warm-white LED bulbs at 2700K-3000K for vanity lighting. Maximum wattage per bulb depends on the specific bulb design — LED bulbs under 10W are generally safe.
Is it suitable for bathrooms?
The IP20 rating means it can be used in bathrooms outside of zones 0, 1 and 2. It can be fitted above a mirror or on a dry wall, but not directly over a sink, bath or shower where water splashing is likely. For wet-zone bathroom lighting, look for IP44 or IP65-rated fittings.
Is it dimmable?
Yes, when paired with dimmable E14 bulbs and a compatible dimmer switch. The brass bar itself has no restrictions on dimming — compatibility depends entirely on the bulb and dimmer pairing you choose.
What length mirror does it suit?
The 605mm bar length works best with mirrors or wall spans between 700-900mm wide, positioned centrally above the mirror. For wider mirrors over 1000mm, consider pairing two Eclipsea fittings or using a longer bar light model.