Free Delivery on all orders over £99*

Citronic XF-XM150RD Balanced XLR Microphone Lead 1.5m

£399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Citronic XF-XM150RD is a 1.5m microphone lead (or cable, if you prefer the US term) with a female XLR at one end and a male XLR at the other. It carries balanced signals, which helps keep noise and interference low over the run, so it suits live vocals, studio work and general stage use. The red jacket makes it easy to pick out when you have several leads bundled together.

Build quality comes from pure copper conductors and cotton reinforcement, giving the cable good conductivity and strength through repeated coiling. The 6mm diameter jacket is rubberised, soft-grip and anti-tangle, so it lies flat and packs away without knotting. Connections are machine-soldered for consistency, and the die-cast XLR connectors lock into place to stop the lead pulling free during a set.

The cable uses 20 x 0.08mm conductors and is fully shielded to reject hum and radio interference. The pin-out follows the standard balanced layout: pin 1 ground, pin 2 hot and pin 3 cold, so it works straight away with standard microphones, mixers and stage boxes. At 1.5m it is a handy short length for close runs, patching between units or connecting a microphone that sits near the desk. If you need longer or shorter runs, the same lead is offered in other lengths across the range.

Specification
Length 1.5m
Colour Red
Cable : diameter 6mmØ
Conductors 20 x 0.08mmØ
Connectors Male XLR, Female XLR
Pin-out Balanced: 1-Ground, 2-Hot, 3-Cold
Frequently Asked

What length is this microphone lead?

It is 1.5m long, which suits short runs, patching between units or a microphone placed close to the mixer.

Does it carry a balanced signal?

Yes. It is wired for balanced use with pin 1 ground, pin 2 hot and pin 3 cold, which helps reject noise over the cable run.

What connectors does it use?

A female XLR at one end and a male XLR at the other, both die-cast with a locking mechanism to stop the lead pulling free.

Is the cable shielded?

Yes, it is fully shielded to reduce hum and radio interference, with pure copper conductors and cotton reinforcement.

Will it work with my microphone and mixer?

It uses the standard balanced XLR pin-out, so it works with standard microphones, mixers and stage boxes.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Citronic XF-XM150RD is a 1.5m microphone lead (or cable, if you prefer the US term) with a female XLR at one end and a male XLR at the other. It carries balanced signals, which helps keep noise and interference low over the run, so it suits live vocals, studio work and general stage use. The red jacket makes it easy to pick out when you have several leads bundled together.

    Build quality comes from pure copper conductors and cotton reinforcement, giving the cable good conductivity and strength through repeated coiling. The 6mm diameter jacket is rubberised, soft-grip and anti-tangle, so it lies flat and packs away without knotting. Connections are machine-soldered for consistency, and the die-cast XLR connectors lock into place to stop the lead pulling free during a set.

    The cable uses 20 x 0.08mm conductors and is fully shielded to reject hum and radio interference. The pin-out follows the standard balanced layout: pin 1 ground, pin 2 hot and pin 3 cold, so it works straight away with standard microphones, mixers and stage boxes. At 1.5m it is a handy short length for close runs, patching between units or connecting a microphone that sits near the desk. If you need longer or shorter runs, the same lead is offered in other lengths across the range.

    Specification
    Length 1.5m
    Colour Red
    Cable : diameter 6mmØ
    Conductors 20 x 0.08mmØ
    Connectors Male XLR, Female XLR
    Pin-out Balanced: 1-Ground, 2-Hot, 3-Cold
    Frequently Asked

    What length is this microphone lead?

    It is 1.5m long, which suits short runs, patching between units or a microphone placed close to the mixer.

    Does it carry a balanced signal?

    Yes. It is wired for balanced use with pin 1 ground, pin 2 hot and pin 3 cold, which helps reject noise over the cable run.

    What connectors does it use?

    A female XLR at one end and a male XLR at the other, both die-cast with a locking mechanism to stop the lead pulling free.

    Is the cable shielded?

    Yes, it is fully shielded to reduce hum and radio interference, with pure copper conductors and cotton reinforcement.

    Will it work with my microphone and mixer?

    It uses the standard balanced XLR pin-out, so it works with standard microphones, mixers and stage boxes.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.