Free Delivery on all orders over £99*
Sold out

Single 2ft T8 LED Ready Non-Corrosive Batten IP65 - Grey Polycarbonate

£1099
The RRP is the manufacturer's recommended retail price of the item.
Out of Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge NCLB12 is a 2ft (653mm) single-tube non-corrosive batten fitting rated IP65 for dust-tight and water-jet-protected installation. The grey polycarbonate body and prismatic polycarbonate diffuser enclose a pre-wired T8 lampholder designed for self-ballasted LED tubes. Unlike traditional fluorescent battens, this fitting has no ballast or driver inside, so it requires a dedicated T8 LED tube with an integrated driver to function.

Designed for industrial, commercial and agricultural environments where moisture, dust and impact are concerns, the IP65 rating allows the fitting to be installed in wash-down areas, cold stores, agricultural sheds, garages and covered outdoor canopies. The polycarbonate body resists impact and corrosion better than steel or aluminium enclosures in damp or chemically aggressive atmospheres. The fitting is supplied pre-wired with two clip-in endcaps that hold the tube securely once inserted.

The 653mm overall length and 94mm width give the batten a compact profile suitable for ceiling and wall mounting in confined spaces. The prismatic diffuser spreads the light output from the tube across a wider angle than a clear cover would, reducing glare and hot-spots on work surfaces below. The fitting carries a Class I earth connection and a 3-year warranty. T8 LED tubes are sold separately and must be self-ballasted types compatible with direct mains connection.

Specification
Length 653 mm
Width 94 mm
Projection 90 mm
Construction Polycarbonate
Finish Grey
Class I
IP Rating IP65
Primary Voltage 230V 50Hz
Diffuser Prismatic
Lamp Technology LED
Lamp Base T8
Lamp Included No
Dimmable Lamp dependent
Warranty 3
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What type of LED tube does this fitting require?

The NCLB12 is pre-wired for self-ballasted T8 LED tubes that connect directly to 230V mains. These tubes have the driver built into the tube itself. Standard fluorescent T8 tubes and LED tubes designed for use with external ballasts will not work in this fitting. The tube is sold separately.

What does IP65 mean in practice?

IP65 means the fitting is dust-tight (no ingress of dust) and protected against water jets from any direction. This makes it suitable for wash-down areas, damp workshops, cold stores, covered outdoor canopies and agricultural buildings. It is not submersible and should not be used in locations where it would be fully immersed in water.

Can this be dimmed?

Dimming capability depends entirely on the T8 LED tube you install. Some self-ballasted T8 LED tubes support dimming, while others do not. Check the tube specification before pairing with a dimmer circuit.

How is the diffuser removed for tube replacement?

The prismatic polycarbonate diffuser clips into the body and can be unclipped by hand to access the tube. No tools are required for routine tube replacement, though initial wiring installation requires a screwdriver to access the terminal block inside the fitting.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge NCLB12 is a 2ft (653mm) single-tube non-corrosive batten fitting rated IP65 for dust-tight and water-jet-protected installation. The grey polycarbonate body and prismatic polycarbonate diffuser enclose a pre-wired T8 lampholder designed for self-ballasted LED tubes. Unlike traditional fluorescent battens, this fitting has no ballast or driver inside, so it requires a dedicated T8 LED tube with an integrated driver to function.

    Designed for industrial, commercial and agricultural environments where moisture, dust and impact are concerns, the IP65 rating allows the fitting to be installed in wash-down areas, cold stores, agricultural sheds, garages and covered outdoor canopies. The polycarbonate body resists impact and corrosion better than steel or aluminium enclosures in damp or chemically aggressive atmospheres. The fitting is supplied pre-wired with two clip-in endcaps that hold the tube securely once inserted.

    The 653mm overall length and 94mm width give the batten a compact profile suitable for ceiling and wall mounting in confined spaces. The prismatic diffuser spreads the light output from the tube across a wider angle than a clear cover would, reducing glare and hot-spots on work surfaces below. The fitting carries a Class I earth connection and a 3-year warranty. T8 LED tubes are sold separately and must be self-ballasted types compatible with direct mains connection.

    Specification
    Length 653 mm
    Width 94 mm
    Projection 90 mm
    Construction Polycarbonate
    Finish Grey
    Class I
    IP Rating IP65
    Primary Voltage 230V 50Hz
    Diffuser Prismatic
    Lamp Technology LED
    Lamp Base T8
    Lamp Included No
    Dimmable Lamp dependent
    Warranty 3
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What type of LED tube does this fitting require?

    The NCLB12 is pre-wired for self-ballasted T8 LED tubes that connect directly to 230V mains. These tubes have the driver built into the tube itself. Standard fluorescent T8 tubes and LED tubes designed for use with external ballasts will not work in this fitting. The tube is sold separately.

    What does IP65 mean in practice?

    IP65 means the fitting is dust-tight (no ingress of dust) and protected against water jets from any direction. This makes it suitable for wash-down areas, damp workshops, cold stores, covered outdoor canopies and agricultural buildings. It is not submersible and should not be used in locations where it would be fully immersed in water.

    Can this be dimmed?

    Dimming capability depends entirely on the T8 LED tube you install. Some self-ballasted T8 LED tubes support dimming, while others do not. Check the tube specification before pairing with a dimmer circuit.

    How is the diffuser removed for tube replacement?

    The prismatic polycarbonate diffuser clips into the body and can be unclipped by hand to access the tube. No tools are required for routine tube replacement, though initial wiring installation requires a screwdriver to access the terminal block inside the fitting.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.