Description
The Nami Ring is a circular LED wall sconce with a concentric ring design moulded into white-finished aluminium, housing an integrated 6W 2700K LED that casts 100 lumens of warm light. The stepped ring profile creates shadow and depth when the LED is lit, turning the flat disc into a sculptural wash light fixture.
Designed for hallways, landings, bedroom reading positions and bathroom mirror surrounds where ambient light is needed without glare, the fixture mounts flush to the wall with the LED positioned behind the front face to diffuse light through the aluminium rings. The 180° beam angle spreads light across the wall surface rather than projecting forward into the room, making it suitable for areas where a direct light source would cause discomfort.
The white aluminium finish pairs with modern and minimalist interiors without introducing metallic tones. The 6W LED output is modest - this is accent and secondary lighting rather than primary room illumination - and the 90 CRI rating ensures colour accuracy in the lit area. The IP20 rating limits installation to indoor dry locations only.
The LED is integrated and non-replaceable, with an expected lifespan of 25,000+ hours at rated usage. The fixture runs on standard 220-240V mains and is not dimmable.
Specification
| Wattage |
6W |
| Lumens |
100 Lm |
| Colour Temperature |
2700K |
| IP Rating |
IP20 |
| Beam Angle |
180° |
| CRI |
90 |
| Voltage |
50Hz AC 220-240V |
| Dimmable |
No |
| Material |
Aluminium |
| Finish |
White |
| Energy Class |
G |
Downloads
Product datasheet
Frequently Asked
Can this be used in a bathroom?
No. The IP20 rating means the fixture is suitable for dry indoor locations only and must not be installed in bathroom zones where moisture or water splashes could reach the fitting.
Is the LED replaceable?
No. The 6W LED is integrated into the fixture and cannot be replaced. The expected lifespan is 25,000+ hours, which equates to approximately 10-15 years at typical domestic usage levels.
How much light does 100 lumens provide?
100 lumens is comparable to a traditional 10W incandescent bulb. This is accent or secondary lighting suitable for hallways, landings and bedside reading positions, but not sufficient as the primary light source in a larger room.
What is the mounting method?
The fixture mounts flush to the wall with concealed fixings behind the aluminium face. Wiring connects directly to mains supply via a standard UK ceiling rose or junction box adapted for wall mounting.